×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

KIM on an 824??

KIM on an 824??

KIM on an 824??

(OP)
I have a customer that has gone through a couple of T7324 sets and rather than buy another, I was going to upgrade them to a T7316e and add a KIM. I had one in stock but had never really tested it, just in a box of parts and pieces for a long time. But when I plugged the KIM in today, it never came up. It turns out that the KSU is an old 824 and it looked like the s.w. version was 2.1. I checked programming and it showed the CAP programmed to 221, which is the one I am working on.
So it's either a bad KIM, or the system is too old to be compatible. The Feature **CONFIG programming goes to 1. CONFIGURATION, etc. NOT to TERMINALS & SETS. So pretty early software.
I may just have to put them back into a M7324, because they need all those appearances and don't want to give them up.
What say you?

RE: KIM on an 824??

Not compatible with that old software. Either go back to a M7324 or upgrade the software. Doubt even the latest software for an 8x24 could handle it. Installing a MICS with at least 6.1 is needed.

RE: KIM on an 824??

(OP)
ok, thank you. yes, I will upgrade the system when it dies. non-profit. broke. thanks for the info.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close