×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Can only access one of three trunks on route

Can only access one of three trunks on route

Can only access one of three trunks on route

(OP)
Hi All
Hope someone can point me in the right direction
Situation is this
M2250 is faulty
System is in night
Set up new extension and pointed NIT1 in to this new extension
There are 3 POTS trunks on the system terminated on XFCOT card
All 3 three trunks will call in on the new extension
ACOD is 9 and I can pick up a trunk and dial out
However only 1 trunk is available for outgoing calls
If this trunk is busy the display shows "destination busy"
When the console was working it was possible to pick up all 3 trunks to make outgoing calls
The trunks are route 0 with acod 9 hunting is round robin and all set to IAO
Thanking You
Frank

RE: Can only access one of three trunks on route

Have you TRACed the trunk TNs in LD 80?

RE: Can only access one of three trunks on route

(OP)
Hello
No I was'nt familiar will the trace command
Which should I use
TRAC c dn or TRAC c r m

RE: Can only access one of three trunks on route

You could use TRAC c dn. Assuming that 9 is the ACOD for the route then that would be
TRAC 0 9

That will show the status of all members of the route.
Then you could use TRAC tn (TRAK tn if it's a small system) to get detailed status of each individual trunk.

RE: Can only access one of three trunks on route

(OP)
Thanks for that
Will try that when I get on site

RE: Can only access one of three trunks on route

Doesn't make a lot of sense unless the TGB Key is activated on the console. That is the only way I know of to block outgoing calls on a trunk group from the console. Otherwise it should work as it did before.

RE: Can only access one of three trunks on route

(OP)
The console is disconnected for the moment
I can only access one of the three trunks in the route using a M3820 set

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close