changing 1140e setup
changing 1140e setup
(OP)
i have attached a picture of a phone i just dug out. I forget how i change this to a "normal" 1140e on a bcm50?
(i hope i attached the file correctly, its my first time doing so)
i think i tucked it away when i first got it as i didn't have time to deal with it, now i actually need it working
can anyone point me in the right direction?
i sort of think its a firmware change, or a phone reset/ default, but i tried the second one and it didn't work
rr
(i hope i attached the file correctly, its my first time doing so)
i think i tucked it away when i first got it as i didn't have time to deal with it, now i actually need it working
can anyone point me in the right direction?
i sort of think its a firmware change, or a phone reset/ default, but i tried the second one and it didn't work
rr
Talk To Other Members
RE: changing 1140e setup
You must first set up a TFTP server with an appropriate configuration file and firmware for your phone.
With the TFTP server up and running, invoke BootC Loader using the following steps:
1. Power off the phone
2. Press and hold the 2 button and the UP arrow button
3. Power up the phone (either through PoE or power adapter) while the buttons above are depressed
4. Keep the buttons depressed for about 7 seconds while the phone is booting
On 1100 series phones, release the buttons when the blue and red lights go off
On 1200 series phones, release the buttons when "Loading BootC" is displayed
4. After releasing the buttons, the phone will display "Manual configuration". Press the four soft keys from left to right to configure the phone to download firmware from your TFTP server.
Also this way by Joe
________________________________________
=----(((((((((()----=
www.curlycord.com
Toronto, Canada
Add me to LinkedIN
RE: changing 1140e setup
i thought it vaguely looked like a SIP login
is there a file name you can recommend (i think i have a few here i've used in the past if i can find them)
or a repository to download them from?
thanks again!
rr
RE: changing 1140e setup
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = http://somertel.com
linkedin
RE: changing 1140e setup
rr
RE: changing 1140e setup
-Make sure you go to Avaya Downloads and get the latest firmware(as of August 2018): 0625C96.bin for the 1140e.
-When the phone has SIP firmware, it will seek the config file: 1140eSIP.cfg
make sure the [FW] section of 1140eSIP.cfg matches the firmware you downloaded:
[FW]
DOWNLOAD_MODE FORCED
VERSION 0625C96
PROTOCOL TFTP
FILENAME 0625C96.bin
For telephone archeologists: If you want it to boot up with a Nortel Logo, then use firmware 0625C7J.bin
Cheers!
Verulam Telephone:
Communicating is our Pleasure!
Serving Eastern Ontario
RE: changing 1140e setup
RE: changing 1140e setup
I sometimes need a refresher
I found my tftp server and the directory i had all my cfg files in
(so i must have done this before)
i even see where the 1140e is looking to the tftp server for the 1140esip.cfg file in the logs
rr
(ps cndr99 - a neat trick would be to get it to boot up with my Northern Telecom/ Nortel Employee badge as a logo - i still have it/ them hahaha )
RE: changing 1140e setup
Too bad the UniStim firmware doesn't permit a background image like the SIP version:
https://files.engineering.com/getfile.aspx?folder=...
Verulam Telephone:
Communicating is our Pleasure!
Serving Eastern Ontario
RE: changing 1140e setup
________________________________________
=----(((((((((()----=
www.curlycord.com
Toronto, Canada
Add me to LinkedIN
RE: changing 1140e setup
Verulam Telephone:
Communicating is our Pleasure!
Serving Eastern Ontario