×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

DayEnd Processing could not process all transactions - PO0335: ????????

DayEnd Processing could not process all transactions - PO0335: ????????

DayEnd Processing could not process all transactions - PO0335: ????????

(OP)
We encountered DayEnd processing problems and it gives an error message that it can't process all the transcations. RVSPY shows below error. Please help in tracking down what's causing the problem. Thank you in advance.

[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {view=0x0486700c}
[6f8] IC0276: ICDEP [02:57:48.74].Cancel(view=0x0486700c)
[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {}
[6f8] IC0276: ICDEP [02:57:48.74].Close(view=0x0486700c)
[6f8] GP0950: GPGLPO [02:57:48.74].Close(view=0x030d200c)
[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {}
[6f8] GP0950: GPGLPO [02:57:48.74].Unload
[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {}
[6f8] IC0276: ICDEP [02:57:48.74].Unload
[6f8] OE0260: OEDEND [02:57:48.75].Open(PIB=2047, link=134)
[6f8] 0 <==[02:57:48.75;t=0;ovh=0] {view=0x0312f00c}
[6f8] OE0260: OEDEND [02:57:48.75].Cancel(view=0x0312f00c)
[6f8] 0 <==[02:57:48.75;t=0;ovh=0] {}
[6f8] OE0260: OEDEND [02:57:48.75].Close(view=0x0312f00c)
[6f8] 0 <==[02:57:48.75;t=0;ovh=0] {}
[6f8] OE0260: OEDEND [02:57:48.75].Unload
[6f8] PO0335: ???????? [02:57:48.75].Unload
[6f8] 9903 <==[02:57:48.75;t=3906;ovh=1413] {**ERROR**}

RE: DayEnd Processing could not process all transactions - PO0335: ????????

Look farther back in the log, that's where the real error is.

Sage 300 Whisperer

RE: DayEnd Processing could not process all transactions - PO0335: ????????

(OP)
Hi Jay,

looked farther the log and found out below multiply error. Does this mean the data is screwed-up?

1.)[6f8] CS0030: CSSKTB [02:57:43.91].Fetch(view=0x01d2d50c)
[6f8] 1 <==[02:57:43.91;t=0;ovh=0] {**ERROR**}

2.) [6f8] AS0007: CSUSCST [02:57:44.01].Fetch(view=0x01d3fdfc)
[6f8] 1 <==[02:57:44.01;t=0;ovh=0] {**ERROR**}

3.) [6f8] GL0022: GLABK [02:57:45.00].Fetch(view=0x01d7c95c)
[6f8] 1 <==[02:57:45.00;t=0;ovh=0] {**ERROR**}

4.) [6f8] GL0008: GLBCTL [02:57:45.07].Fetch(view=0x01d5a00c)
[6f8] 1 <==[02:57:46.40;t=1331;ovh=0] {**ERROR**}

5.) [6f8] IC0378: ICOFH [02:57:46.66].Read(view=0x01d7ec54)
[6f8] 1 <==[02:57:46.66;t=0;ovh=0] {**ERROR**}

6.) [6f8] IC0420: ICPOSTR [02:57:46.67].Fetch(view=0x01ddc304)
[6f8] IC0560: ICRCPH [02:57:46.67].Fetch(view=0x01daa744)
[6f8] 1 <==[02:57:46.67;t=0;ovh=0] {**ERROR**}
[6f8] 1 <==[02:57:46.67;t=0;ovh=0] {**ERROR**}

7.) [6f8] PO0585: POOFH [02:57:46.80].Read(view=0x01d7ec54)
[6f8] 1 <==[02:57:46.80;t=0;ovh=0] {**ERROR**}

8.) [6f8] PO0580: POOFD [02:57:46.81].Fetch(view=0x030f4f4c)
[6f8] 1 <==[02:57:46.81;t=0;ovh=0] {**ERROR**}

9.) [6f8] AP0500: APOFD [02:57:46.82].Fetch(view=0x030ff5e4)
[6f8] 1 <==[02:57:46.82;t=0;ovh=0] {**ERROR**}

10.) [6f8] PO0351: POGLREF [02:57:46.88].Fetch(view=0x01ddbbfc)
[6f8] 1 <==[02:57:46.88;t=0;ovh=0] {**ERROR**}

11.) [6f8] GL0022: GLABK [02:57:46.99].Fetch(view=0x01d7c95c)
[6f8] 1 <==[02:57:47.00;t=10;ovh=0] {**ERROR**}

12.) [6f8] GL0022: GLABK [02:57:46.99].Fetch(view=0x01d7c95c)
[6f8] 1 <==[02:57:47.00;t=10;ovh=0] {**ERROR**}

13.) [6f8] PO0330: POCRNZ [02:57:48.38].Fetch(view=0x030e88ec)
[6f8] PO0312: POCRNI [02:57:48.38].Fetch(view=0x0329d044)
[6f8] 1 <==[02:57:48.38;t=0;ovh=0] {**ERROR**}
[6f8] 1 <==[02:57:48.38;t=0;ovh=0] {**ERROR**}
[6f8] PO0445: POINVZ [02:57:48.38].Fetch(view=0x03107494)

14.) [6f8] PO0732: PORETI [02:57:48.38].Fetch(view=0x04b18c0c)
[6f8] 1 <==[02:57:48.38;t=0;ovh=0] {**ERROR**}

15.) [6f8] AP0015: APVEN [02:57:48.48].Read(view=0x04bee8fc)
[6f8] 1 <==[02:57:48.48;t=0;ovh=0] {**ERROR**}

16.) [6f8] 0 <==[02:57:48.53;t=0;ovh=0] {}
[6f8] 0 <==[02:57:48.53;t=51;ovh=51] {}
[6f8] PO0700: PORCPH [02:57:48.53].Read(view=0x0489611c)
[6f8] 1 <==[02:57:48.53;t=0;ovh=0] {**ERROR**}
[6f8] 1 <==[02:57:48.53;t=71;ovh=71] {**ERROR**}
[6f8] 1 <==[02:57:48.53;t=1853;ovh=1103] {**ERROR**}
[6f8] IC0276: ICDEP [02:57:48.53].Cancel(view=0x01d3cdcc)

17.) [6f8] GL0008: GLBCTL [02:57:48.53].Get(view=0x01d5a00c, field=1, size=6)
[6f8] 0 <==[02:57:48.53;t=0;ovh=0] {buffer='\30\30\39\36\37\38' -> '009678'}
[6f8] 1 <==[02:57:48.53;t=0;ovh=0] {**ERROR**}
[6f8] GL0008: GLBCTL [02:57:48.53].Put(view=0x01d5a00c, field=8, size=1, verify=0, buffer='\33')

RE: DayEnd Processing could not process all transactions - PO0335: ????????

No, keep looking.

Sage 300 Whisperer

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close