×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Capture PMS log realtime
2

Capture PMS log realtime

Capture PMS log realtime

(OP)
Hi all,

We have a PMS link between CM 6.0.1 and Duvoice PMS, i need capture all transaction log that PBX sent & receive from Duvoice PMS. I have setup PMS log Endpoint in system-parameters hospitality point to a PC, port 51001. On that PC, i use putty to telnet/ssh to PBX port 51001 but nothing pull out. I used command: status journal-link pms-log to check, the link state is up but nothing pull out. Have anyone setup link to print PMS log successful? Kindly advise me.



RE: Capture PMS log realtime

When you setup your PMS endpoint at PMS IP:51001, I'd think the PBX is pitching a UDP data stream to that IP on port 51001. I wouldn't think that you can setup a telnet TO the PBX on 51001 to prove anything.

At the very simplest, if your duvoice is running on a windows server, just run wireshark with a filter like tcp.port == 51001 or udp.port == 51001 and you'll quickly see if anything is getting there.

If your CM is on system platform, from dom0 as root, you can "tshark -i avpublic port 51001" to see packets out of the server on that port or add a "-w /tmp/mypmstest.pcap" to write it to a file to grab with winscp later (don't forget to chmod 666 /tmp/mypmstest.pcap first)

RE: Capture PMS log realtime

CODE

change mst                                                      Page   1 of  16
                                MESSAGE SEQUENCE TRACE

     Run Time Limit: 99 days      Disable On Buffer Full? n  Generic Filters? n
    Store Timestamp? y                     Start Trigger? n          Log Mst? y
    Message Storage: entire                 Stop Trigger? n   Trace Analyzer? y
                                              Stop Count:
                                               Retrigger? n

     X.25? n       GATEWAY? n          EWT? n  DEBUG BUTTON? n  HW ERROR LOG? n
 ISDN-PRI? n          CCMS? n   SIP Trunks? n         PRECs? n   PROC ERRORS? n
 ISDN-BRI? n        PACKET? n   CALL TRACE? n           BSR? n            IP? n
     ASAI? n       VECTORS? n          CDR? n DENIAL EVENTS? n          BASM? n
      CMS? n VECTOR EVENTS? n          PMS? y  FW ERROR LOG? n
     IP Stations/LSPs/ESSs? n

X.25 Filter Data
             Processor Channel: 1                    Link Control: all
              Application Data: none               Session Timers? y
                 Confirmations? n              Application Errors? y
               Session Control: all         Unrecognized Messages? y
     Processor Channel Control: all 

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
http://bshtele.com

RE: Capture PMS log realtime

Command: enable mst
Command: status mst
Command: list mst continuous auto

Use web browser maintenance pages to look at MST logs for window in time

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
http://bshtele.com

RE: Capture PMS log realtime

Good job on the mst

Kyle is correct

Is this new? Has this ever worked? What changed?

/* maid_sup.c (1085)
* PMS failed to respond to maid status
* in 4 seconds allowed. */

listhistory in Linux
Command: list history

These commands should show log information

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
http://bshtele.com

RE: Capture PMS log realtime

(OP)
Hi kyle555 and AvayaTier3,

Thanks for kind advice, the PMS link between Avaya CM and Duvoice PMS work normally(since 2014). Recently, some room status posting delay post to PMS, I co-ordinated with PMS vendor and they said their PMS software work OK. I acknowledge denial event 1085 already, the PBX gave this event but room status still posted to PMS after a bit delay. What I want to setup realtime PMS log printer to show customer/client that PBX already sent Maid/HK command to PMS(they said the issue cause of PBX keep command in buffer). The Avaya document did not give detail how to capture PMS log realtime, may your expertise can give me the answer.

RE: Capture PMS log realtime

CODE

change system-parameters hospitality                            Page   1 of   3
                              HOSPITALITY

                       Message Waiting Configuration: act-pms
               Controlled Restrictions Configuration: act-pms
               Housekeeper Information Configuration: act-pms
                     Number of Housekeeper ID Digits: 0
                                    PMS Log Endpoint: PMS_JOURNAL


display ip-services                                             Page   1 of   3

                                   IP SERVICES
 Service     Enabled     Local        Local       Remote      Remote
  Type                   Node         Port        Node        Port
PMS                  Clan             0       IolanClan       5102
CDR1                 Clan             0       IolanClan       5103
PMS_JOURNAL          Clan             0       IolanClan       5104
SAT           y      Clan             5023    any             0
display ip-services                                             Page   3 of   3

                              SESSION LAYER TIMERS
  Service     Reliable  Packet Resp   Session Connect  SPDU  Connectivity
   Type       Protocol     Timer       Message Cntr    Cntr     Timer

 CDR1            n         30                3          3         60
 PMS_JOURNAL     n         30                3          3         60 

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
http://bshtele.com

RE: Capture PMS log realtime

(OP)
Hi AvayaTier3,

I followed your instruction, but still nothing output.





Anywhere I need activate/enable to make it works, please advise?

RE: Capture PMS log realtime

status journal-link
Use status journal-link to see the operational status of a wakeup-log or a pms-log
printer link. If the link is down, the number of times the switch has tried to re-establish the link
will be shown.
A journal printer is used to document automatic wake-up events, emergency access to
attendant events and, if the Property Management System is not functional, housekeeping
events. When the system includes two printers, one is for the housekeeping events and the
other is used for automatic wake-up events and emergency access events.
See status link for more details on links.
Syntax
status journal-link [ wakeup-log | pms-log ]

test journal-printer
Use test journal-printer to perform hardware diagnostics on the link between the
switch and a specified journal printer link to either the pms-log printer or the wakeup-log
printer.
Syntax
test journal-printer pms-log | wakeup-log [ short | long ] [ repeat # |
clear ] [ schedule ]
pms-log Test the link to the Property Management System printer, whose maintenance
name is PMS-PRNT.
wakeup-log Test the wakeup-log printer, whose maintenance name is JNL-PRNT.
short Execute a series of nondestructive diagnostic tests.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
http://bshtele.com

RE: Capture PMS log realtime

(OP)
Hi AvayaTier3,

I used NetCat to access PBX port 51001 then check the status journal-link and test journal-printer.

The status journal-link pms-log is up, test journal-printer pms-log pass with code #215.

I wonder is there another client tool to access PBX to capture PMS log?



RE: Capture PMS log realtime

(OP)
Hello,

Has anyone setup this successful? Kindly advise me.

RE: Capture PMS log realtime

HI EXPERTS

how can i disable double click action of ACW button(One X agent)?. Just want to avoid the permanent after call state

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close