LG Ericssson IPECS eMG80 solution required
LG Ericssson IPECS eMG80 solution required
(OP)
Hi,
I have inherited an LG Erricson iPECS system as above and have problems logging into the system though the web portal, the IP address is 10.10.10.200 but it says access denied when I try to login through the browser. I would also like to know how to transfer calls to an external number if I am out of office, can it be done manually through an extension or it has to be programmed through the eMG80. The extensions are all LG LIPS-8002e.
Please help
I have inherited an LG Erricson iPECS system as above and have problems logging into the system though the web portal, the IP address is 10.10.10.200 but it says access denied when I try to login through the browser. I would also like to know how to transfer calls to an external number if I am out of office, can it be done manually through an extension or it has to be programmed through the eMG80. The extensions are all LG LIPS-8002e.
Please help
RE: LG Ericssson IPECS eMG80 solution required
You can program it manually through the extension by dialling 5541 or *5541 or #5541 then plus number you are forwarding your calls to, and save, depending on what is programmed on the PBX under Flexible Numbering Plan (106-109)"Call Forward".
RR
RE: LG Ericssson IPECS eMG80 solution required
RE: LG Ericssson IPECS eMG80 solution required
Thanks
RE: LG Ericssson IPECS eMG80 solution required
cus engineers very rarely set a password you can reset most passwords from key set programming . you will still how ever need the user name to login .
by default its admin and 1234 as the password .
so you could reset the password and try admin and the new password through that . otherwise you will have to just default it and start again
if you have inherited the system i would do that from a security point of view and so you know whats been set up.
i can usually program a system up in under 30 mins.
RE: LG Ericssson IPECS eMG80 solution required
RE: LG Ericssson IPECS eMG80 solution required
once you have access remember to change all the IDs to something else . set a remote password and a key set password as well.
i love my serial lead lol