×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

(OP)
Hello,
I have lost the incoming ring tone from all stations including station 100.

This happened after switching the system off for some work being done in the room. when switched on again, it worked fine except the incoming ringing tone.

The system is old (GHX-512) but the basics are more or less the same.

Have initialized all parameters (System , Co line, and station parameters). Everything work fine except the ringing tone. A caller can hear the ringing tone and if I press button 1, a connection takes place.

A telecom engineer checked everything and advised me to configure the CO line.

The sequence used on this system is:
off-hook
*7764
Flash (identical to Recall on other systems)
a two-digit number

Have tried:
off-hook
*7764
Flash
03 (Select Station Range)
100100
Flex Key 11
Flex Key 8
01013
HOLD
on-hook

It hasn't worked. I would greatly appreciate any help.

The manual is not that clear really. But if it helps to send a scanned part of the manual, I will do so. It is quite urgent! Thank you in advance.

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

(OP)
Any chance of a response :)
If only a hint?
Would greatly appreciate it.

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Hi mm1582,

I know on slightly newer systems like a LDK 100/300 there is a analogue ringer unit inside. When this breaks analogue phones don't ring. I know its a long shot but might be worth having a look at.

Kind regards,
Wishforall

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

(OP)
Thank you, Wishforall, for your suggestion.
I will check the ringer unit.

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Hi

Pretty sure its recall 40 for line programming. 01013 for button 1, line 1, rings day and night. Could be recall 30 though.

Will search for the manual.

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

(OP)
Mr.Phones, Thank you very much.
The link doesn't seem to work:
Link

It says something like: "waiting for files engineering com" and nothing happens!

It could be a temporary thing, but have tried it for the last hour or so.
Will keep trying. Many thanks.

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Hi I would agree with what Mr. Phones has said.
You're really on the right path except after you have entered the station number 100100 you need to press hold/save

Using a 33 button phone

It's Recall/Flash 40
sta range 100100
hold
flex key 11 (2nd page of options)
flex key 8
01013
hold/save
Sounds like the battery on the back plane has finally run down, you may have to do this if the power goes off again.
Regards
Marek

PS This system is vintage!!

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Jonah29's pulled that one out the bag!!!! I knew there was a second page but couldn't remember the flex key for it.

Star awarded!

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

(OP)
Thank you Marek and Mr. Phones,

The link doesn't work for me for some reason. A blank page is displayed. But I have written to GOLDSTAR in Ireland requesting help in finding a manual.

I am using a 21-button phone (GSX E-21 button).

On this system there is no Recall/Flash 40. The relevant available ones are:-

Flash 50: Initialize System Parameters
Flash 51: Initialize CO LINE Parameters
Flash 52: Initialize STATION Parameters
Flash 02: CO LINE ATTRIBUTES
Flash 03: STATION ATTRIBUTES

There are 6 extensions (Stations 102 to 107). Should the station range be 100107?

Have tried:
*7764
Flash 03
100100
HOLD
flex key 11
flex key 8
01013
HOLD

Still not ringing!
Thank you for your time and patience!

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

Oh ok
So yes I would expect you to use Flash 03
So is sta 100 not needed for ringing?
We assumed you wanted station 100 to ring
Yes range can either be 100107 or 102107.
Do you only have one line on the system?
Marek

RE: Goldstar Telephone System programming - No Incoming Ring Tone (in all stations)

(OP)
Thanks a lot Marek.
Sta 100 is not needed to ring, but if it did that would be okay.
It's more important to get extensions 102 to 107 to ring.
There is only one line on the system.

I noticed that the LED light on Button 1 (station 100) is not let with an incoming call. It used to.
I'm not sure if that helps in diagnosing the problem.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close