×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Fractional PRI to Cisco 1760-v

Fractional PRI to Cisco 1760-v

Fractional PRI to Cisco 1760-v

(OP)
Hello,

Thank you all for sharing your wisdom -- this forum (and a few other online resources) have helped me learn a vast amount about the Meridian systems.

I had a quick question about Fractional PRI setup. I'm working on planning out a T1/PRI set up between a Cisco 1760-V and an Meridian 1 / Opt 11c. I've got my head wrapped around the configuration of the T1/PRI from both the M1 and Cisco perspective as far as connectivity via the full set of T1/PRI channels is concerned... however, I discovered that the Cisco 1760-V I have en route is equipped with a PVDM-256K-4, meaning it can only do ~6 channels of DSP for a Voice PRI.

In theory this is no problem, since I can set up a fractional PRI on the Cisco and M1 sides to only use Channel 1-5 and 24 for DCH ( I don't really need all 23 channels anyway since this is a lab/home setup).

On the Cisco side that part is fairly simple since I could just do something like this:

controller T1 1
framing esf
linecode b8zs
pri-group timeslots 1-5,24

However, how do I accomplish this on the M1 side? I have a config already built on the M1 for a PRI with all the fixin's including DCH/DLOP/RDB and DID TRKs for all 23 channels. From my searches here, I found that it looks like I just need to OUT the DID/Trunks that correspond to the TNs of the channels that aren't used, is my thinking here correct? Here's that post https://www.tek-tips.com/viewthread.cfm?qid=156472... that gave me that notion.

Would I also need to make any adjustments to the DLOP settings under CEQU? Currently mine is set like below:

DLOP NUM DCH FRM LCMT YALM T1TE TRSH
PRI 02 23 ESF B8S FDL - 00
MISP

I also looked thru the ADAN DCH config but doesn't look like there's anything there that I need to change to reflect the usage of specific channels...

Either way any and all help/advice are appreciated :)

thank you,
bc

RE: Fractional PRI to Cisco 1760-v

Hi you should just need to out the extra channels from LD 14

RE: Fractional PRI to Cisco 1760-v

(OP)
Awesome, thank you! I was hoping it would be that simple :)

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close