×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Spectralink SIP Phones incoming CLID incorrect when doing TOD check through app builder.

Spectralink SIP Phones incoming CLID incorrect when doing TOD check through app builder.

Spectralink SIP Phones incoming CLID incorrect when doing TOD check through app builder.

(OP)
Hi guys,

I am still relatively green to this world but I have an issue I am trying to work through and was hoping someone could potentially point me in the right direction.

Recently we replaced 2x Companion Phones with 2 newer Spectralink SIP models - 8440's. The ext's these devices were associated went through Application Builder for TOD check and would forward the call off to the appropriate line as stipulated by the TOD. Now it turns out the users of these devices relied on the incoming CLID on these devices for missed calls or anything like that. The issue we are having is these SIP phones are not displaying the CLID correctly due to what I believe is Call Pilot inserting its own CLID after TOD checks , so incoming CLID is something like "Call Pilot" .

Is there a way to keep TOD checks in place AND have it show the correct incoming call to these devices ? With the previous phones it worked with no problem !
Previous devices were Avaya 6120s.
Would appreciate any help!

Thhank you

RE: Spectralink SIP Phones incoming CLID incorrect when doing TOD check through app builder.

Could be on the SIP protocol
SIP use international format +1 and so on
But you can monitor that on the Virtual DChannel
Use OVL 96
"stat mon" shows actual state of monitoring DChanel
Enter " enl msgi xx " and "enl msgo xx" for print protocoll messages
If dont appears
"set msgo xx mon 0" "set msgi xx mon 0" first
Same on trunk for external calls
Good luck

RE: Spectralink SIP Phones incoming CLID incorrect when doing TOD check through app builder.

For change outgoing TOD use ovl 86 cmdb table

RE: Spectralink SIP Phones incoming CLID incorrect when doing TOD check through app builder.

you are placing a Call from Originating Phone to Callpilot App, then the Callpilot is placing a call to the destination, hence why you see the CLID of the Callpilot channel at the distant end.

Just use TOD routing against an RLI and use a TSC to route the call through.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close