×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

CS1000E Wall Cabinet to CS1000E 1010 chassi.

CS1000E Wall Cabinet to CS1000E 1010 chassi.

CS1000E Wall Cabinet to CS1000E 1010 chassi.

(OP)
All,

We are moving a site from a location that has a cs1000E using the wall cabinet(old opt. 11c cabinets). I was curious if I could use the 1010 chassi's at the new site and just migrate the existing cards from the opt. 11C cabinets. If I can, is there programming changes that need to happen?

Thanks

Jeremy

RE: CS1000E Wall Cabinet to CS1000E 1010 chassi.

I'm not sure if the SSC card will fit in slot "0", In theory, I don't see why it wouldn't work. As long as you have all the available card slots.

Your TTY cables will have to be plugged in where the MGC TTY cables fit and I don't know if the connections are different. You might also have a problem with any IP connections as the 11c uses a transceiver.

I haven't seen a 1010 chassis for a few years now,

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.com
linkedin

RE: CS1000E Wall Cabinet to CS1000E 1010 chassi.

The 1010 has a card slot specifically for the MGC, not sure it would support the SSC

RE: CS1000E Wall Cabinet to CS1000E 1010 chassi.

(OP)
I should have added that the CS1000E has MGC Cards and a CPPM for a processor. Also, we do have a CPDC Card for SS, but site doesn't have Voip sets.

RE: CS1000E Wall Cabinet to CS1000E 1010 chassi.

don't see a problem, as long as the supl is the same. Got a feeling that the MG1010 needed different firmware to stop the fans spinning at max all of the time

Remember if it doesn't work hit it harder

Scott UK

RE: CS1000E Wall Cabinet to CS1000E 1010 chassi.

The fans on the MG1010 calm down once the MGC registers.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close