×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Option 11 with no dial tone on same extensions every day

Option 11 with no dial tone on same extensions every day

Option 11 with no dial tone on same extensions every day

(OP)
Hello, I have been experimenting the same problem every day with and old Option 11 that I have to manage at job. I know that if a user lets his phone not hanged correctly during night, next day it is necessry to enable his extension again by enlu command, but I have been experimenting this behaviour with 3 differents extensions on the same card. Is there some command that I am missing to solve this more that enlu and .edd to save changes on Hard Drive? Or can be some card problem... The problematic extensions are 6 02, 6 14 and 6 15.

Any help will be very appreciated.

Thanks.

RE: Option 11 with no dial tone on same extensions every day

First thing I would check is that the amphenol plug for slot 6 is fully plugged in under the card. TNs can disable because of bad wire connection and these are all connected through that plug. If that doesn't fix it then try reseating the card.
Also, there is no need to .edd after the enlu. The status of the TN is not saved in a data dump.

RE: Option 11 with no dial tone on same extensions every day

have a look at the firmware on the affected sets assuming their digital, run a "FDLF TN" in either 32 or 20, the firmware upload will take about 20 mins per TN & don't touch the set until its completed

Remember if it doesn't work hit it harder

Scott UK

RE: Option 11 with no dial tone on same extensions every day

Try adding FLXA and VCE to the problematic phones ( in the TN class of service ). This will prevent them from being disabled during the PBX midnight returns which sounds like is what is happening in your case.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close