Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCS50 Openvox PRI 1

Status
Not open for further replies.
NorrinRadd1

NorrinRadd1

Technical User
Mar 26, 2014
34
US
UCX50 5.0 Openvox D130 T1/PRI

UCX recognizes the D130 but I can't change it from E1 to T1 or change the framing to B8ZF/ESF. The Openvox website seems to be down so I cant get a full manual so I'm not sure if its a dip switch setting on the card or I'm missing something in programming. Any help would be appreciated.
 
Sort by date Sort by votes
You must set the DIP switch(es) on the card to select the E1 or T1 mode. I believe it is the B DIP switch block. The card can have up to 4 spans - there is one DIP switch for each span. Set it to OFF for T1 or ON for E1.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

curlyhex
  • Locked
  • Question
UCX250 internal PRI card
Replies
5
Views
378
ucxguy
ucxguy
bb2179
  • Locked
  • Question
Queue Priorities
Replies
1
Views
248
ucxguy
ucxguy
Atechguyy
  • Locked
  • Question
UCx50 PRI
Replies
4
Views
284
theislandtech
theislandtech
jerrymac
  • Locked
  • Question
Dual PRI Trunks
Replies
2
Views
195
getsomesun1
getsomesun1
sstelecom
  • Locked
  • Question
Windstream PRI
Replies
8
Views
319
theislandtech
theislandtech

Part and Inventory Search

Sponsor

Back
Top