×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

How to INI a CS1000 7.6 and CS1000E 7.6 PBX

How to INI a CS1000 7.6 and CS1000E 7.6 PBX

How to INI a CS1000 7.6 and CS1000E 7.6 PBX

(OP)
Can someone provide step by step instructions on how to INI both the CS1000 and C1000E PBX? Both are on release 7.6.
Can anyone refer me to an NTP that explains the process?

RE: How to INI a CS1000 7.6 and CS1000E 7.6 PBX

Look in the maintenance input output guide at LD 135 you can sysload or INI active, inactive or both there. Also if you access PDT on the call server reboot is INI and reboot -1 is sysload

RE: How to INI a CS1000 7.6 and CS1000E 7.6 PBX

(OP)
Thanks for you input.
I plan to change the OPD "out pulse digits setting" in the RDB.
According to the software IO guide, you have to INI the PBX before the change will take affect.
I'm assuming I would need to INI both.
Does the INI both command actually INI both at the same time or does it INI one and then the other?
I want to make this as least service affecting as possible.
What is the best approach?

RE: How to INI a CS1000 7.6 and CS1000E 7.6 PBX

You could get away with INI Active as it should come back up on the same processor. So change the setting, EDD the switch, then ini the active should be good.

RE: How to INI a CS1000 7.6 and CS1000E 7.6 PBX

(OP)
Shouldn’t I INI both sides so that if the CPU switched it would still work?

Also can you INI the inactive side or do you have to make it active first?

RE: How to INI a CS1000 7.6 and CS1000E 7.6 PBX

if a cpu switches it ini's to come into service

RE: How to INI a CS1000 7.6 and CS1000E 7.6 PBX

If you want to you could ini the active so that your settings are in. Then ini the inactive for good measure after the sync.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close