×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

3750 to 3850 QoS commands

3750 to 3850 QoS commands

3750 to 3850 QoS commands

(OP)
Hello,

Is there a config guide or other source someone can recommend for this. I have a lot of 3750 switches that are being refreshed with 3850 and I want to make sure the QoS settings are carried over properly. Been awhile since I worked with Cisco so my knowledge is a little rusty. Here is an example of the config from an interface on the 3750

interface range GigabitEthernet1/0/23 - 24
description VLAN 222 Device
switchport access vlan 80
switchport mode access
switchport voice vlan 60
srr-queue bandwidth share 1 70 25 5
priority-queue out
mls qos trust dscp
spanning-tree portfast

RE: 3750 to 3850 QoS commands

The differences in the QoS configurations between the two platforms is fairly big. The 3650/3850 is more or less like configuring a fully fledged router - requiring ingress and egress service policies. I have done some work with this for several customers as well as comparing the generated AutoQoS configurations between the two and then customising the output.
There is a guide on CCO here - https://www.cisco.com/c/en/us/support/docs/switche... that should help you out. As you are simply enabling the egress strict priority queue (priority-quie out) and trusting the incoming DSCP values (mls qos trust dscp) it shouldn't be too difficult.

Andy

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close