Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


Auto Dial keys on 1230ip phone

Auto Dial keys on 1230ip phone

Auto Dial keys on 1230ip phone

I am able to program AD keys on the phone and they will dial the number when pressed but will not show up as busy.
They are off of a BCM 450 Rls 6.0.
They are at a remote site.
Wondering if there is a setting to check in the network switch at the remote site or possible setting in the configuration of the phone.

RE: Auto Dial keys on 1230ip phone

Odd, I had this issue today at a site.
I have seen this the very odd time and wondered why and what the fix was.

In my case today I had a back door line that they wanted to ring 12 times on ALL sets before going to AA where the main lines went to AA right away.
I tried using HG' while making the line Appear Only but it did not work even if the HG was A&P or Ring Only.
In trying to use HG's I made the lines Private to wipe the line off all sets and just added the HG's but they had to have an appearance of the line so I put them back, dropped the HG method and went old school...

I removed FNA from all sets
Set Transfer Callback to 3 rings
Set DRT to None
Set Lines - Prime Set to None
Now all calls transferred by AA go to the mailbox after 4 rings and the backdoor line rings 12 times on all sets then AA.
First complaint within minutes - "my DSS does not show the arrow when he is on the phone"
I reprogrammed the button with F*2 even thought it was programmed, called in with mobile phone, he answered and the indicator showed fine as it should....I did not test other calls in any other way or any other set.

So what ever steps I did above somehow jarred the DSS button to have the same symptom as you do.

Not sure on the software level but it had Hunt Groups and no ability to program an unused DN.
I am guessing 2.0


Add me to LinkedIN

Toronto, CAN

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close