Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LUCENT MERLIN 408 GS/LS-MLX exangche

Status
Not open for further replies.
mercuriotelecom

mercuriotelecom

IS-IT--Management
Nov 11, 2008
25
MX
LUCENT MERLIN Module Card 408 GS/LS-MLX AGS OR LS OUTSIDE LINES / 8 MLX (DIGITAL) TELEPHONES
We have two of these modules with damage all 8 Telephone ports not woks, this two modules are in the 2nd Expalsion CPU, If we have another two and shutdown the CPU and replace the modules, when we turn in on the cpu expnsion all works again or we need program shomwthing?

Thnaks.
 
Sort by date Sort by votes
Rule of thumb when dealing with Legend and Magix systems is to power down from left to right and power up from right to left. If you are replacing a bad board with the exact same model you should be ok. It would be wise to execute a Board Renumber to ensure that the processor fully sees and recognizes everything.

I [love2] "FEATURE 00"
 
Upvote 0 Downvote
I would recommend doing a board renumber. Even if you think they are the same module they might be slightly different and will have issues unless you do a board renumber. You do not need to worry about programming anything again, just a board renumber.
 
Upvote 0 Downvote
If You are replace the bad 408 GS/LS-MLX with another 408 GS/LS-MLX in the exact same slot, You will be okay like Dexman said. Indeed power down from left to right, and power up from right to left.

Andre
 
Upvote 0 Downvote
Andre and Dexam
you instruction to power off are the expand unit( Left ) to the main unit ( Right ) and power up from right expand unit to left main unit.

it is Right?
 
Upvote 0 Downvote
First power down the carrier on the left which contains the processor. Powering up...the left carrier is done last so the processor can see all of the cards to the right.

I [love2] "FEATURE 00"
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jpanzer
  • Locked
  • Question
AT&T Merlin 7318H Display Console Power Supply
Replies
2
Views
492
jpanzer
jpanzer
MerlinRob
  • Locked
  • Question
Merlin Legend - can you answer a page by lifting a handset? 3
Replies
6
Views
587
MerlinRob
MerlinRob
JRuntz
  • Locked
  • Question
Avaya Merlin Voicemail Stops Working 1
Replies
18
Views
1K
Dexman
Dexman
Jim E
  • Locked
  • Question
Merlin Legend Internal Line Disconnect Time
Replies
4
Views
399
TouchToneTommy
TouchToneTommy
TrilokSingh
  • Locked
  • Question
MCK w/ Merlin Magix
Replies
1
Views
289
TouchToneTommy
TouchToneTommy

Part and Inventory Search

Sponsor

Back
Top