Dialling 9 Automatically Dialling 9 Automatically KJBen (TechnicalUser) (OP) 12 Dec 01 07:02 I need to set up a analog port to automatically include a 9 before I dial out. How and where on the system can I do this?Thanks in advance RE: Dialling 9 Automatically roche (TechnicalUser) 12 Dec 01 08:23 HiAnalog stations have the option of having a Hot Line Destination. If a Hot Line Destination is assigned then everytime a user picks up the phone the destination number is automatically dialed. You can make the destination number a 9. Although by doing this means that extension to extension calls cannot be made from this station.Hope this helps. RE: Dialling 9 Automatically KJBen (TechnicalUser) (OP) 12 Dec 01 08:25 Cheers mate.What I was really after, was HOW to do it?It doesn't matter about the extensions as we will use it to test dial-ups from modems. RE: Dialling 9 Automatically roche (TechnicalUser) 12 Dec 01 08:43 One other option.If this station is a modem then you can go into the dialing properties of the modem and have the 9 inserted for all outside calls.Roche RE: Dialling 9 Automatically KJBen (TechnicalUser) (OP) 12 Dec 01 09:22 Yes, it's what we do now but it would be easier and neater to do it the way I need it done. I know it can be done but I don't know how.Cheers RE: Dialling 9 Automatically applepie (TechnicalUser) 12 Dec 01 10:35 If you want to set 9 as hot-line destination, the 9 needs to be added to one of the abbreviated dial lists for the station.Say for example your analog station is 2000.change abbreviated personal 2000Let's say for example--dial code 5 is open, so enter the 9 in that fieldThen change station 2000:at Hot Line Dest, abbr dialing list number, enter 1 (In this example we are saying that List 1 is where the 9 was added- on my forms this is the personal list)Then on the next line, at dial code enter 5Hopefully this explanation will help.