Analogue (Pots) Line trouble
Analogue (Pots) Line trouble
(OP)
Looking for suggestions.
Company installed a Polycom Soundstructure w/ an analogue card.
I can't get them to go VOIP (I tried!!), so I have to connect to an analogue line.
Got it connected today and on my side... The connection sound excellent!!!
On the far end, they mentioned a hollow, muffled type connection. It was audible, but just not crystal clear.
Looking for an adapter that can help clear up the connection (if there is such a beast).
Don't want to fix the far end and hurt my side!!!
Researched and see that there are several Analogue Adapter available, but what does these items do?
Anyone ever had this problem and how did you fix?
As always.. THANKS FOR THE HELP
Company installed a Polycom Soundstructure w/ an analogue card.
I can't get them to go VOIP (I tried!!), so I have to connect to an analogue line.
Got it connected today and on my side... The connection sound excellent!!!
On the far end, they mentioned a hollow, muffled type connection. It was audible, but just not crystal clear.
Looking for an adapter that can help clear up the connection (if there is such a beast).
Don't want to fix the far end and hurt my side!!!
Researched and see that there are several Analogue Adapter available, but what does these items do?
Anyone ever had this problem and how did you fix?
As always.. THANKS FOR THE HELP
A Tek-Tip Lover
RE: Analogue (Pots) Line trouble
Have you played with the settings in Studio software depending on where/how you installed the mics versus the rooms environment (ceiling/walls/floor) etc?
Check out some of thes videos
________________________________________

Add me to LinkedIN
=----(((((((((()----=
www.curlycord.com
Toronto, CAN
RE: Analogue (Pots) Line trouble
If the problem still exists, it's with the POTS line.
If the problem doesn't exist with a Butt set then it's the Polycom.
Just my $.02
"What the captain doesn't realize is that we've secretly replaced his Dilithium Crystals with new Folger's Crystals."
--Greg