DID Problem (SIP) eMG80 DID Problem (SIP) eMG80 Agent0007 (IS/IT--Management) (OP) 21 Aug 17 06:15 Good day!! What could be the problem if the PBX only sends 0 as DID? It is a SIP in emg80 system for example, 012345-12 to 012345-15 must be sent but it always sends 012345-0. Thank you very much! BR RR RE: DID Problem (SIP) eMG80 martinhodge (Vendor) 1 Sep 17 15:22 under program 100 remove the area code . under program 151 set the COLP Table Index CLIP Table Index to station cli for the sip trunks ,. then under 113 . station cli 1 you can set any number you want their pretty much as long as your sip providor allows it .