Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CLIP No Screening with SIP
- Thread starter Agent0007
- Start date
eats4treats
Technical User
RR
We have to make sure 'CLI Flexibility' is active on our SIP providers portal. Then we use the CLI STA in pgm 113. Line 12 - STA CLI 1 Enter full number you wish to display.
Cheers
Eats
Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
We have to make sure 'CLI Flexibility' is active on our SIP providers portal. Then we use the CLI STA in pgm 113. Line 12 - STA CLI 1 Enter full number you wish to display.
Cheers
Eats
Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
- Thread starter
- #3
eats4treats
Technical User
RR
PGM 151 in CO Line Attributes, COLP and CLIP Index set both to 'Use Station CLI', add the zero in for 'My area prefix code'.
Should be ok with that. All depends on the SIP provider really, we use Gamma which is IP Address authentication.
Eats
Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
PGM 151 in CO Line Attributes, COLP and CLIP Index set both to 'Use Station CLI', add the zero in for 'My area prefix code'.
Should be ok with that. All depends on the SIP provider really, we use Gamma which is IP Address authentication.
Eats
Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
- Thread starter
- #5
- Status
Similar threads