×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Removing Virtual Station from CM

Removing Virtual Station from CM

Removing Virtual Station from CM

(OP)
All,

I set-up a virtual station for testing purposes and now I need to remove the station. If i use command rem stat X it takes me to the stat and if I select enter to remove it, I'm getting Enhanced mode allowed on multimedia stations only. Also if I try to change the station type to see if I can remove that was, it tells me that station must be removed and re-added to change type. All help would be appreciated.

RE: Removing Virtual Station from CM

Try list usage extension XXXX to see if the virtual station is used elsewhere.

_______________________________________________________________
Everyone seems to have a very short attention... etc.

RE: Removing Virtual Station from CM

(OP)
I tried list usage extension XXXX and the virtual station isn't being used anywhere else. Any other suggestions so I can remove this station.

RE: Removing Virtual Station from CM

maybe it'll clear with a reset 4. Maybe someone made it as a x ported station and changed to virtual after with that mode set and it can't be changed now?
Could be a minor translation corruption.

RE: Removing Virtual Station from CM

(OP)
I'm the one who actually created the station as a virtual station so I know it wasn't made as a x-ported station. Also one thing I just noticed is that it won't allow me to even change the COR or Coverpath, it give me the Enhanced mode allowed on multimedia stations only. Are you suggesting that I reboot our PBX to see if that clears it. Would be hard to reboot since were open almost 24hrs. Any other suggestions.

RE: Removing Virtual Station from CM

Can you busy the station?
If you can, try removing when busied.

_______________________________________________________________
Everyone seems to have a very short attention... etc.

RE: Removing Virtual Station from CM

can you do change station x and paste the screen output with the returned error here?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
http://bshtele.com

RE: Removing Virtual Station from CM

(OP)
When trying to busy out station, I get no hardware assigned.

RE: Removing Virtual Station from CM

(OP)
One other thing I just tried. I added another virtual station to see if I could remove it and it allowed me to remove it successfully. This leads me to believe its something specific that that station that I created and somehow stuck in translations.

RE: Removing Virtual Station from CM

exit GEDI on ASA then use advanced tab, emulation and connect.
Command: remove station x

Again, post results

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
http://bshtele.com

RE: Removing Virtual Station from CM

do a change station, change it to a 2500 set, enter go back and then see if you can delete it

RE: Removing Virtual Station from CM

will it let you do it this way, do a change extension-station xxx at top line enter a new extension number. Worth a try

RE: Removing Virtual Station from CM

try list usage extension ### and see if it is link into another station as bridged appearance

RE: Removing Virtual Station from CM

already suggested!

RE: Removing Virtual Station from CM

(OP)
Tried changing to a new extension and it let me do that but won't let me remove the new extension. I changed it back and I've sense opened a ticket with Avaya.

RE: Removing Virtual Station from CM

sounds like some data corruption

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close