personal directory or call log features personal directory or call log features centrait (MIS) (OP) 10 Jul 17 15:47 I have a CS1000 and using Telephony Manager. How do I turn on the personal directory or call log features for IP phones? RE: personal directory or call log features FirebirdScrambler (Programmer) 10 Jul 17 16:01 Although I've not personally done it, I'm sure it's all done from accessing the Signalling Server. Firebird Scrambler Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer Website = http://somertel.com linkedin RE: personal directory or call log features LittleMaster (TechnicalUser) 10 Jul 17 17:10 Using the CS1000 Element Manager (resides on the Signaling Server) there is a field that needs to be filled in with the ELAN IP address of the primary Signaling Server under IP Telephony -> Personal Directories -> Server -> Server IP Address should be set to the ELAN IP address of the primary Signaling Server. RE: personal directory or call log features bignose21 (Programmer) 10 Jul 17 22:18 Like LittleMaster says enter the ELAN IP of the server you want to use as the PD server, any of the SS will do depending on the number of extensions might depend where you put it. For example if you had several thousand users it would be best to have a PD server that doesn't do anything else (No TPS, VTRK, etc.), if you only have a few users you may just have one SS doing everything. Once you assign the server ELAN you need to restart the phones for it to show up.