×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

LDK 100 Auto Attendant

LDK 100 Auto Attendant

LDK 100 Auto Attendant

(OP)
Hi There,

Good day, i need help on this matter. I'm using LDK 100. i have configured an Auto Attendant on the system and it worked fine. Just as simple as press 1 for english and press 2 for chinese. but then i found an issue that i could'nt resolve until now. When the outside caller calls the CO Line they would successfully hear the Auto Attendant messages, but if the caller suddenly hang up the call during the AA playing, i noticed that the CO Line still unreleased and i need to wait for 30 seconds to the line to be idle. Thank you in advanced and your help would be appreciated.

Regards,
Aarmax

RE: LDK 100 Auto Attendant

Hi

This is the 'Disconnect Clear Time' located in CO programming around PGM142/143.

In the UK we need this to be set to 05 (500milliseconds). You will also need to ask your line provider to set the lines on the network to 800milliseconds, this will prove to be the hardest part of the job!

Eats

Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!

RE: LDK 100 Auto Attendant

(OP)
Hi,

Thank you for your swift reply. Would you please tell me where is Disconnect Clear Timer located in PGM 142. I saw Open Loop Detect Timer, CO Flash Timer only and there's no Disconnect Clear Timer. In PGM 143 refers to ISDN Config only. Regarding 800 milliseconds, are you referring to Polarity Reversal Configuration on our Line Provider?

Please advise.

Aarmax

RE: LDK 100 Auto Attendant

Aarmax

'Open Loop Detect Timer' is the one you need.

Contact you provider and ask them to change the 'Open Loop Disconnect Timer' to 800 Milliseconds. This is the time for BT in the UK. May be a different timer in other countries. This is taking into account the lines you are using are analogue?

Eats

Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!

RE: LDK 100 Auto Attendant

(OP)
Hello Eats,

Thank you for your confirmation on the Open Loop Detect Timer. I believed that i'm on the right path now. I was confused about the Line Polarity Reversal as my client applied for it in our Brunei Service Provider. I thought that once we have the polarity reversal then it can solve the issue, but it seems like this Open Loop Detect Timer is another story. For further info, yes i'm using Analogue Lines. Thank you again for sharing your professional support. I will liaise with our provider and let you know once i'm done with this matter.

Regards,
AarMax

RE: LDK 100 Auto Attendant

(OP)
Hi Eats,

Good Day. I have another question about the VMIB. I have noticed that after 2 to 3 incoming calls they would hear the VMIB messages, then the next or 4th caller cannot hear the VMIB messages and forwarded straight to Operator. Why is it happen? Please advise

AarMax

RE: LDK 100 Auto Attendant

The VMIB is only a 4 channel auto attendant card so really it would be the 5th call that would follow ring assignment. Unless your using an IPLDK20 which is only a 3 channel card.

Is anyone listening to voicemail at the same time or using the vmib to control the music on hold?

Eats

Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!

RE: LDK 100 Auto Attendant

(OP)
Hi Eats,

Apology for late response. i have checked again the purchase order in my office and the Customer bought 8 ports voicemail and AA card for IPLDK 100 Platform. That means it should be 8 ports can be use? I'm thinking if i forget something to configure to use up these 8 ports instead of 4 ports?

Is anyone listening to voicemail at the same time?

* My answer is yes, 4 callers listening simultaneously then the 5th call followed the ring assignment. Last week, i received complaints about the Auto Attendant. They said they did'nt hear the messages. When i checked the system, the VMIB Card was hang and to put it back to normal, i reset the VMIB Card through Reset Button and it works normal again.

Please advise

Regards,

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close