Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

iPECS eMG80 Timed Base Routing

iPECS eMG80 Timed Base Routing

iPECS eMG80 Timed Base Routing

Hey Guys,
I just want to simply set the system up so business hours rings on the default huntgroup and after hours + weekends goes to voicemail. Set it up in the System Call Routing (251) section and seemed to work.
HOWEVER, customer reported calls going to the SIP trunks business continuity number after 20 seconds, trace confirmed that after 20 seconds the call was being cancelled. Deleted all entries in the System Call Routing section and now incoming calls are behaving.

What is the correct way of programming timed based routing for incoming calls. Does the above sound like it could just be a bug?

RE: iPECS eMG80 Timed Base Routing


Set your day and night destinations in 231 as needed and also set ICM tenancy group to some think different to your extensions e.g 100

then set your auto ring table in 233 that matches the setting above e.g 100

then set go into 257 attendant ring mode and the ring mode to auto for the ICM tenancy group above e.g 100

this should do what you are looking for

RE: iPECS eMG80 Timed Base Routing

what lines do they have?

you will need to make sure that the incoming number is matching the line presented to the system in system call routing .

its quite common for instance if you program the system call routing with the 6 digits coming off a isdn circuit . that when a customer ports to sip you will need to input the full dialed number as per the packet and header . ie your need to insert the area code as well.

you can use either the auto ring mode table yes .

but the system call routing will give you a much better control over timed destinations . allowing you to change the ring destination to weather you want at what ever time you want not limiting you to only 3 ring modes effectively you can have as many as you like.

also make sure that your system times are correct and that the did/disa timer is raised from the default on the system as well . i usally stick it at 99.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close