×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

UCx1000 revolabs flx2 going offline

UCx1000 revolabs flx2 going offline

UCx1000 revolabs flx2 going offline

(OP)
I have an issue with a Revolabs FLX2 conference phones going offline after a unkown period of time. The phone is showing that it stays registered but can't make a phone call and it won't take any inbound phone calls. The only fix as of right now is to unplug the network cable from the base and plug it back in. I have checked all the setting in the phone and on the PBX. Everything seems to match up. Anyone have any experience with these phones?

Conference phone is a 10-FLX2-200-VOIP connected to an Emetrotel UCx-1000

RE: UCx1000 revolabs flx2 going offline

I have tested quite a number of SIP devices against our UCx product line, but I had not heard of Revolabs before this post.

With that said, I may not be of very much help but let me try.

I am going to make a couple of assumptions -
first the phone does register correctly when you power cycle it
second when the device gets into this state the device can not see the UCx server - I make this assumption because if the SIP device could see the UCx it would still be able to make outbound calls without the device being registered with the UCx.

When you see the phone in this state, navigate to the PBX/Tools gui page and in the CLI field type the command 'sip show peers'
you will see the extension number and if it is registered you will see the ip address. if it is registered dial *65 on the device and see what extension is spoken to you. Does it match what you expect?

I suspect it won't show as registered. Now I would go to the Support/Packet Capture page, and start a packet capture, Cycle the Device and stop the capture when the device is online. Use wireshark to view the sip messages n the packet capture. Inspect the packets just to make sure there were no errors in the registration sequence.

My only other guess is that a timer is kicking in. and the only way yo figure out which timer is to monitor the device and see if it goes offline consistently at the same time after registration. Convert the minutes to seconds and look for a timer in the settings of the device that matches up to your calculations.

according to the manufacturer the default for the refresh timers is that the device send the options message to the server not the other way around.

let me think a bit more about this.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close