×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Can't change line ringing settings on any extension

Can't change line ringing settings on any extension

Can't change line ringing settings on any extension

(OP)
Has anyone run into this issue? Basic mode R9.1.7 system. Cannot change line ringing from immediate to no ring and have it work on any extension. Tried setting the lines to delayed ring - saved config. Reprogrammed to no ring - saved config. Tested - they still ring immediately. Tried a warm boot - no change; "cold" boot - no change. Re-upgraded IPO to R9.1.7 - no change. Not sure what to try next.

Tom Daugirdas,
STCG, Inc.
stcg.com

RE: Can't change line ringing settings on any extension

(OP)
Found the answer. I had to delete the lines from each of the extensions that needed a different line ringing mode - and save the configuration - then had to reprogram the lines in the correct ringing mode and save the configuration. Hopes this helps someone else with the same issue.

Tom Daugirdas,
STCG, Inc.
stcg.com

RE: Can't change line ringing settings on any extension

ummm yeah... we have stop selling basic version of IPO because of issues like you described. A real Partner ACS was a champ and programming worked. Thanks for posting the fix!

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close