Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


Outboud campaign problems

Outboud campaign problems

Outboud campaign problems

Hy guys,

I am trying to configure my IPOCC 9.1.2 demo to make a Dialer Campaign.
The problem is that I am new to this, I don't understand how it works, I have read the documents from Avaya, I have read/followed all the steps in the Dialer Based Guide but my system is not making any calls..

Since I am not especting a resolution from you guys based on what I said about let me start with a question :

I see that I have configured Access Codes for Dialer "9" .. what is an access code? if the system automatically calls the customer and then transfers the call to an agent, what is this code used for ?

Thank you,

Vlad C.

RE: Outboud campaign problems

Have you even done the IPOCC training?

"Trying is the first step to failure..." - Homer

RE: Outboud campaign problems


One year ago.. but I had to actually start working on the system 1 month ago..

RE: Outboud campaign problems

Well then you'll get to go the new 13 day training soon =)

Access code is used for line prefix, if you need to dial for example 9 before the number for an outgoing call.

"Trying is the first step to failure..." - Homer

RE: Outboud campaign problems

Fair enough :)

Ok, thank you for your information...

May I ask another question, this time regarding the privileges one can assign to a profile :

So there are 2 radio boxes.. I understand that the one in the left, if checked, enables the options, but what is the deal with the one on the right? where the option is "P" ?

Vlad C.

RE: Outboud campaign problems

I have played and played with the system..
There was a problem in my taskflow editor.. the condition of free agents wasn't good.. I simply connected the Topic - > AG and the call went through..


RE: Outboud campaign problems

The two checkboxes you mentioned are:
1: Can the user use the feature
2(P): Can the user pass this right to other users

That way you can have for example a supervisor that can edit agents, agent groups,.... but (without P checked) can't give another user those configuration rights.

RE: Outboud campaign problems


Thank you for your answer Aflalis :)

I have noticed that If I use the diret dialer, the outbound works fine.
But when I use mechanical Dialer and follow the documentation, adding the condition to verify that the agent is free, the call flow is not working. When I remove the condition and simply Link the Telephony Outbound to the AG then it works .. So there must be something IPOCC can't do in that Logic element..

Getting back to you with updates :)

RE: Outboud campaign problems

Coming back..

I have configured the system to use Mechanical Dialer with Power Dialer - Dial Factore 2.0 .. that means that CHAP should make 2 calls/free agent and then connect the call to the agent only when the customer has answered.. correct ?

This is not happening.. I created jobs in campaing and the system calls the 1st nr, then calls the second nr and so on.. no simultaneous calls .. Any ideeas on how to troubleshoot this? :)

Thank you !

Vlad C.

RE: Outboud campaign problems

Have you made the dialer settings for the system or the specific campaign?

I had an issue using Topic Dialer that it didn't take the default setting from System, I had to enter the specific settings on each Topic.

"Trying is the first step to failure..." - Homer

RE: Outboud campaign problems

Hmm, let me try, it's a good ideea...

Thing is I had to change the PBX ip addr.. i can make calls but my dialer won't call any jobs now..

I changed the IPO ip address under Configuration-> PBX and restart watchdog and ipo syn service.. are there any other modifications i have to do ?

Update: Found this settings -

trying again

RE: Outboud campaign problems

You can check TTrace under Optional -> Dialer to see what it's doing.

"Trying is the first step to failure..." - Homer

RE: Outboud campaign problems

I have this from TTrace :

IPO-IPOSyncService :

K9964d 13:40:20.234 TC_General ORB initialized
K9965d 13:40:20.234 TC_General Initialize database connection
K9967d 13:40:20.282 ISS_Service DB connected
L0019d 13:40:21.326 TC_General Database connection initialized
L0020d 13:40:21.326 TC_General ISS Initializing finished
L0021d 13:40:21.327 TC_General IPOCC Sync Operation Started
L0022d 13:40:21.327 TC_General Started sync service thread
L0023d 13:40:21.328 TC_General HeartBeat thread Started
L0024d 13:40:21.346 TC_General IP Office details : IP Address: Port No: 8443 IPO User Name: Administrator
L0025d 13:40:21.346 TC_General **********Getting device for syncing whether its IPO V2 or IPOL *****
L0164d 13:40:28.443 TC_Error connect timed out

So it's remembering 0.2 .. ther's something else..

RE: Outboud campaign problems

IPOSyncService is for syncing configuration between IPOCC and IPO.
I usually disable this, it's set in the PBX Configuration.

"Trying is the first step to failure..." - Homer

RE: Outboud campaign problems

ok :) ..

So its calling the jobs but only for Agent Jobs.. campaign jobs are not called .. :-/
so i will investigate it and come back :D

RE: Outboud campaign problems

So we have fixed the problem, we had to do a couple things to do :

- Performed system overall configuration check – applied techtip 277, 284 and Ring Timeout (Techincal Buletins from Avaya Support website ).
- Performed system check on Ipv6 setting and disable it in registry setting.
- Increased Dialer Number Types from default 0:20 to 0:59 secs
- Reactivated Taskflow with Dialer. Re-imported call jobs.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close