web management / upgrade exos image
web management / upgrade exos image
(OP)
Hi,
I am new here so hello to everybody, I need to upgrade the exos 11.5.2b10 of a summit x450e, the thing actually is that I can´t access the web page of the switch, I have already configured the management IP, but once I connect to it prompts for credentials and after using the admin credentials it just shows a blank page with the following url http://switch-ip/hello.
I have been searching but I think this is the only forum for this kind of switches, so any help will be highly appreciated
thanks in advance
I am new here so hello to everybody, I need to upgrade the exos 11.5.2b10 of a summit x450e, the thing actually is that I can´t access the web page of the switch, I have already configured the management IP, but once I connect to it prompts for credentials and after using the admin credentials it just shows a blank page with the following url http://switch-ip/hello.
I have been searching but I think this is the only forum for this kind of switches, so any help will be highly appreciated
thanks in advance
RE: web management / upgrade exos image
--->>
TFTP server connectivity to switch must be established
from switch cli switch# download image <tftp ip> exosfilename vr vr-mgmt/default secondary/primary
Download after installation – YES
- you will need to run extremeswitch# use image primary/secondary ( to switch to the upgraded partition )
Reboot
And repeat process for the other partition, no reboot necessary.
I have included documentation and references for your use as well.
http://documentation.extremenetworks.com/hw_sw_com...
- Recommended software
https://extremenetworks.okta.com/login/login.htm?f...…
- Access to software downloads if you have login access, to request login access contact Extreme TAC.
" The best way to predict the future, is to create it " - Peter Drucker