Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


Audiocodes Mediant 1000/Lync 2013 SBA Proxy Configuration

Audiocodes Mediant 1000/Lync 2013 SBA Proxy Configuration

Audiocodes Mediant 1000/Lync 2013 SBA Proxy Configuration

We are running Mediant 1000's in remote offices with PRI lines. We are running Lync 2013 as well. We have centralized mediation servers running on the centralized Lync front-end servers. We have the SBA loaded on the Mediant 1000s for the remote sites as well also running as a mediation servers.

Ideally we want all calls, inbound and outbound to go through the remote site gateway and mediation server. Currently, the Inbound calls route through the local gateway just fine. However, all outbound calls are routing the RTP over the WAN through the central mediation servers before going out the remote site PRI, essentially doing a round-trip to the centralizes servers. Obviously this is adding latency and jitter and occasional call quality issues.

Anyone out there doing something like this and able to advise on the proper settings for both the Mediant 1000 and Lync? We've Googled this thing to death, called Audiocodes (they say it is a Lync issue and thus they cannot assist,) We've opened a ticket with Microsoft and we have engaged a consultant. Still now progress. I have some very unhappy people.

Any assistance appreciated.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close