Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

chane time for hipath 4000 v6

chane time for hipath 4000 v6

chane time for hipath 4000 v6

please can anyone help me . I change time for hipath 4000 v6 from Linux . but station not updated .and when I display time (dis-date).display the old time before modifying

RE: chane time for hipath 4000 v6

You need an NTP server in your network.
Go on the network with a laptop, ensure that the NTP server is working.

RE: chane time for hipath 4000 v6

I change it manually. hipath in my company has only expression server I don't have NTP server.so I change it manually
note: it was work before .I made it several time before .but this time station not update

RE: chane time for hipath 4000 v6

If you have Xpressions you can setup an NTP server on it for the HiPath.
I presume you have a Router or an IP switch - setup an NTP server on those.
You can change the time in the Assistant

RE: chane time for hipath 4000 v6

NTP server for Xpressions Link

RE: chane time for hipath 4000 v6

thanks very much
appreciate your reply

RE: chane time for hipath 4000 v6

I'll try to do it Sunday ISA

RE: chane time for hipath 4000 v6

Good Luck :)

RE: chane time for hipath 4000 v6

There is some information I hope it can help you:
To update the phone display immediately do:
<reg-date; => and send the command result to the system ( in older versions, need to do twice).
e.g.: CHANGE-DATE:WEST,360,DST,60;

Note: CHANGE-DATE should not be used during high traffic because it forces (beside other things) immediately time-update of all phone-devices. Several individual messages per device will be generated in the BP and transferred all the way down to the devices. In large PBXs this will produce a lot of traffic and big load in the BP and in the LTUs. It will take several minutes to process all devices and may interfere with other CP-activities. (Calls may be delayed ...). If still the same, restart SLMO cards...

RE: chane time for hipath 4000 v6

On V6 and above - any Hipath using Linux - needs to see an NTP server.
That NTP source can be anywhere reachable on your network.
The Assistant then sets the HiPath time.
Previously you did CHANGE-DATE on the Comwin itself.

RE: chane time for hipath 4000 v6

kevinjing , sbcsu
many thanks for both of you
today I make reg-date and all stations update immediately .but with time shift 2hours so put offset = 0 (it was 120).now everything is ok. but I think it's better to add NTP on Xpresssion system for easy modify and accurate time.
thanks a lot

RE: chane time for hipath 4000 v6


e.g.: CHANGE-DATE:WEST,360,DST,60; /* West from Greenwich-UK=> for US-Central Time =CST= - 6 Hours = 360 Minutes;
DST=Daylight Savings Time = 360 - 60 = 300 = -5 Hours on ADP from GMT (Greenwich Meridian Time)

<DIS-DATE; +-----------------------------+ | THURSDAY | | DATE: TIME : | | 2013-09-19 10:06:39 | | | | NUMBER OF DAY : 262 | | DAYLIGHT SAVINGS TIME | | GMTDIR: WEST TIMEOFFS:360 | | DSTOFFS:60 | | REL. DIFF. TO GMT : -300 | +-----------------------------+

RE: chane time for hipath 4000 v6

I recently noticed that when I change the time, it takes 6-8 hours for the devices to update, or you can force it by disconnecting and reconnecting the device.


Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close