Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

sendmail 8.14 FEATURE dnsbl seems broken

sendmail 8.14 FEATURE dnsbl seems broken

sendmail 8.14 FEATURE dnsbl seems broken



I am running three debian email servers and recently wanted to address spam coming in to them. One sever is sendmail version 8.14.4 the other two are 8.14.3. All three servers exhibit the same behavior.

I added milter-greylist to each of them, it works brilliantly, stopping better than 50% of incoming spam.

I then tried to install realtime dns blacklist checking using three popular free services with entries to my /etc/mail/sendmail.mc file.

Two of the services, bl.spamcop.net and dnsbl.sorbs.net cause sendmail to reject every single incoming message as observed in my /var/log/mail.log file.

The third black list service, zen.spamhaus.org when enabled, doesn't seem to do anything at all.

I have tried all sorts of combinations, disabling greylisting, inserting the ipv6 workaround ( define(`DNSBL_MAP'...), using the enhanced blacklist feature "enhdnsbl" and activating only one blacklist at a time. Each time recompiling my sendmail.mc file and restarting sendmail.

I cannot find any references to others that have had this behavior and I'm at a loss as how to troubleshoot it from here.

If anyone has any suggestions or comments, they are greatly appreciated.

My sendmail.mc follows at the end of this posting.

Thanks in advance,



#   Copyright (c) 1998-2005 Richard Nelson.  All Rights Reserved.
#  This file is used to configure Sendmail for use with Debian systems.
VERSIONID(`$Id: sendmail.mc, v 8.14.4-4 2013-02-11 11:12:33 cowboy Exp $')
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
dnl #
dnl # General defines
dnl #
dnl # SAFE_FILE_ENV: [undefined] If set, sendmail will do a chroot()
dnl #   into this directory before writing files.
dnl #   If *all* your user accounts are under /home then use that
dnl #   instead - it will prevent any writes outside of /home !
dnl #   define(`confSAFE_FILE_ENV',             `')dnl
dnl #
dnl # Daemon options - restrict to servicing LOCALHOST ONLY !!!
dnl # Remove `, Addr=' clauses to receive from any interface
dnl # If you want to support IPv6, switch the commented/uncommentd lines
dnl #
dnl DAEMON_OPTIONS(`Family=inet6, Name=MTA-v6, Port=smtp, Addr=::1')dnl
DAEMON_OPTIONS(`Family=inet,  Name=MTA-v4, Port=smtp')dnl
dnl DAEMON_OPTIONS(`Family=inet6, Name=MSP-v6, Port=submission, M=Ea, Addr=::1')dnl
DAEMON_OPTIONS(`Family=inet,  Name=MSP-v4, Port=submission, M=Ea')dnl
dnl #
dnl # Be somewhat anal in what we allow
dnl #
dnl # Define connection throttling and window length
define(`confCONNECTION_RATE_THROTTLE', `15')dnl
dnl #
dnl # Features
dnl #
dnl # use /etc/mail/local-host-names
dnl #
dnl # The access db is the basis for most of sendmail's checking
FEATURE(`access_db', , `skip')dnl
dnl #
dnl # The greet_pause feature stops some automail bots - but check the
dnl # provided access db for details on excluding localhosts...
FEATURE(`greet_pause', `1000')dnl 1 seconds
dnl #
dnl # Delay_checks allows sender<->recipient checking
FEATURE(`delay_checks', `friend', `n')dnl
dnl #
dnl #
dnl #
dnl # the following was added to make milter-greylist work, see its readme
dnl #
define(`confMILTER_MACROS_CONNECT', `j, {if_addr}')
define(`confMILTER_MACROS_HELO', `{verify}, {cert_subject}')
define(`confMILTER_MACROS_ENVFROM', `i, {auth_authen}')
define(`confMILTER_MACROS_ENVRCPT', `{greylist}')
dnl #
dnl # The following lines activate DNS based Black (HOLE) List testing on three different free services
dnl #
define(`DNSBL_MAP', `dns -R A')
dnl #
dnl #
FEATURE(`dnsbl', `dnsbl.sorbs.net', `"571 IP=" $&{client_addr} " -see http://www.sorbs.net/'")dnl
FEATURE(`enhdnsbl', `zen.spamhaus.org',`"571 IP=" $&{client_addr} " -see http://www.spamhaus.org/"')dnl
FEATURE(`dnsbl', `bl.spamcop.net',  `"571 IP=" $&{client_addr} " -see http://spamcop.net/bl.shtml?"')dnl
dnl # If we get too many bad recipients, slow things down...
dnl #
dnl # Stop connections that overflow our concurrent and time connection rates
FEATURE(`conncontrol', `nodelay', `terminate')dnl
FEATURE(`ratecontrol', `nodelay', `terminate')dnl
dnl #
dnl # If you're on a dialup link, you should enable this - so sendmail
dnl # will not bring up the link (it will queue mail for later)
dnl define(`confCON_EXPENSIVE',`True')dnl
dnl #
dnl # Dialup/LAN connection overrides
dnl #
dnl #
dnl # Masquerading options
dnl #
dnl # Default Mailer setup
dnl #  thatt's all folks 

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close