×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

activity code name not updating / ccm 5.0

activity code name not updating / ccm 5.0

activity code name not updating / ccm 5.0

(OP)
I am trying to simply update the name on one of our existing activity codes for a not ready state. I changed the activity code name first, and tested but still had the old name display on the agent's set. I then outed the code, rebuilt it, but still same results. I even outed the activity code, and left it out, tested, and the old name still showed up on the agents phone display? What am I missing? Thanks

RE: activity code name not updating / ccm 5.0

have you stopped and started the services on CCMS?

RE: activity code name not updating / ccm 5.0

(OP)
Hi, no I have not done anything with the services. I was going to do the old reboot and see what that does. But thanks, I will try the services first.

RE: activity code name not updating / ccm 5.0

or maybe the restart HDC service, that would be none service affecting, I had a look at the dependencies for the service. Just make sure TFE service is not a dependency that would stop your call routing (scripts). If that fails, then stop all the ccms services, which as you know will be service affecting

RE: activity code name not updating / ccm 5.0

(OP)
We rebooted the ccm server today but the not ready activity codes did not update. Am I doing this in the wrong place? I am going to switch admin / activity codes, and changing it there. I also built a new test code which did not work either?

RE: activity code name not updating / ccm 5.0

what software is it, symposium, cc6, cc7 or aacc?

RE: activity code name not updating / ccm 5.0

(OP)
We are on rls 5 for the contact center

RE: activity code name not updating / ccm 5.0

ccma, configuration, activity codes?

RE: activity code name not updating / ccm 5.0

(OP)
I open my shortcut on my desktop to the SMI window and go into switch config, then activity codes and make the change. If I go into the web client and go into config, from there I can see the change I made to the activity code but it still doesn't show up on the agents set.?

RE: activity code name not updating / ccm 5.0

it never does show up on the set, but only in the report?

111 make booking

agent activity report, it should show up on that,

you can look at the EB log on the CCMS to check that the code is being entered, i think the field is activitycodestat = 111 or whatever.

RE: activity code name not updating / ccm 5.0

(OP)
Great, thank you. I will check the log and reports.

RE: activity code name not updating / ccm 5.0

(OP)
All the reports I run show only the default activity code of 000..?

RE: activity code name not updating / ccm 5.0

OK that says to me, that as you say the default activity code being used, this normally when a the code is not known or wrong code entered.

so lets go back to basics.

Press the activity code key -> enter activity code -> press the activity code key. No # after the number

So there are 2 reports, when the agent is on a call, the key flashes, then agent enters the activity code.

There is also the Not Ready reason codes, so if you are entering the code not on an active call, so check the not ready reason code report also

Not that it makes a difference, how many digit

RE: activity code name not updating / ccm 5.0

(OP)
The activity code we are changing the name to is a 1 digit code.This is used for not ready code. I am told by some agents that they do see the activity code on the phone display after hitting not ready, acnt key, enter activity code, acnt key. I tried these steps and did not see any codes come up at all on the phone display. When I run reports I only see the default codes.? I would think this is a simple change to do ..?

RE: activity code name not updating / ccm 5.0

If the Activity key is not flashing check if the NRAC prompt in LD 23 of the ACD Queue is set to: YES

RE: activity code name not updating / ccm 5.0

(OP)
Good thought thanks, I already checked that and it is set to yes. When we hit the not ready key the acnt key starts to flash.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close