201i fail

OldNortellian · Jul 21, 2014

I have a 201 in an old Opt 11. No idea the software level of the CP as now upon reboot, the status window cycles through the boot process, then says "warn" then "fail". Can I just take the hard drive and the media cards and dongle out and put them in/on a new 201i card? Or am I going to run into keycode trouble.

PERRYPJ · Jul 21, 2014

You will need the Keycodes

OLD ROLMEN WORKING ON NORTELS AND AVAYA

PERRYPJ · Jul 21, 2014

It sounds like the HD is bad

OLD ROLMEN WORKING ON NORTELS AND AVAYA

OldNortellian · Jul 22, 2014

when I do a stat ELAN, I get

SERVER TASK: ENABLED
ELAN #: 16 DES: CPILOT
APPL_IP_ID: 0 .0 .0 .0 LYR7: DOWN DSBL

OldNortellian · Jul 22, 2014

After doing to tracing of cable, I found that the patch cables go to a Nortel BPS data switch. Power light is on but no activity on any of the ports. There is a patch cable from the transceiver, and one to the server and one to the main PC. Plugging my laptop in, I get nothing.

OldNortellian · Jul 22, 2014

turns out the Nortel switch was bad. Moved and vm came up.

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

201i fail

OldNortellian

Vendor

PERRYPJ

Technical User

PERRYPJ

Technical User

OldNortellian

Vendor

OldNortellian

Vendor

OldNortellian

Vendor

Similar threads

Part and Inventory Search

Sponsor