This does not apply to the CMC (Prologix) which comes with the PI cable.

W-BL/BL-W    Major (External with signal incoming to system)
W-O/O-W      Minor (External with signal incoming to system)
W-G/G-W       GRD
W-BR/BR-W     GRD
W-S/S-W       GRD
R-BL/BL-R     GRD
R-O/O-R       GRD
R-G/G-R       Not Connected
R-BR/BR-R     Not Connected
R-S/S-R       Not Connected
BK-BL/BL-BK  -48/GND (Emergency Transfer Relay Power)
BK-O/O-BK    -48/GND (Emergency Transfer Relay Power)
BK-G/G-BK    -48/GND (Emergency Transfer Relay Power)
BK-BR/BR-BK  -48/GND (Emergency Transfer Relay Power)
BK-S/S-BK    -48/GND (Emergency Transfer Relay Power)
Y-BL/BL-Y    -48/GND (Emergency Transfer Relay Power)
Y-O/O-Y      -48/GND (Emergency Transfer Relay Power)
Y-G/G-Y      Not Connected
Y-BR/BR-Y    GND/-48 (AUX Power)
Y-S/S-Y      GND/-48 (AUX Power)
V-BL/BL-V    GND/-48 (AUX Power)
V-O/O-V      Not Connected
V-G/G-V      Ext Alarm A/Ext Alarm Return
V-BR/BR-V    Not Connected
V-S/S-V      INADS Tip/INADS Ring

I put the pinouts to a webpage to make it more orderly.
http://www.cyxla.com/avaya/AUXILIARY.html
what i notice was that the books of R6 and before and
R7 and greater are different.
the diverge is in the AUX Power.

R6 an before
pin, coler,  Explanation,
44   Y-BR    -48
19   BR-Y    GND
45   Y-S     -48
20   S-Y     GND
46   V-BL    -48
21   BL-V    GND

R7 and later
pin, coler,  Explanation,
44   Y-BR    GND
19   BR-Y    -48
45   Y-S     GND
20   S-Y     -48
46   V-BL    GND
21   BL-V    -48

I belief that the first (R6) is the right one.
Be careful with testing.

All of the other pinouts are the same as in the posting
of maxg.

Greets, Bob

Thanks alot guys,  This is just what I needed

Thanks again

Dave