I'm trying to configure from the initial setup a Cisco AIR-AP1131AG-A-K9 what i'm trying to do is to generate a simple SSID with WEP or WPA security, i'm very newly un Cisco but i've noticed that i have 4 interfaces, what i did without good result was.
- Enter to the interface dot11Radio 0 (2.4 GHz) and set a SSID, and execute the command "no shut" to enable the interface.
- The same on the dot11Radio 1 (5 GHz), but i can't see the SSID's, i don't have connected the fastethernet interface to nothing, the main problem irs that i can't get visible the ssid, i will be very gratefull if someone can help me.
the ap is new i recently erase the test configuration i've made
Thanks in advance !!!