Virtual paging os iS3000
Virtual paging os iS3000
(OP)
Hi all,
I need to run a paging to a external loudspeaker system in a iS3000.
The OM command manual refers about commands CRPARE, CRPART, ASPACD.. etc in the "paging" section.
In the Facility Voice Manual I found the follow hint:
"3.17. PAGING
Please refer to the Facilities manual 'Networking & Routing'."
Do somebody have this manual or a step-by-step to implement this facility?
I need to run a paging to a external loudspeaker system in a iS3000.
The OM command manual refers about commands CRPARE, CRPART, ASPACD.. etc in the "paging" section.
In the Facility Voice Manual I found the follow hint:
"3.17. PAGING
Please refer to the Facilities manual 'Networking & Routing'."
Do somebody have this manual or a step-by-step to implement this facility?
RE: Virtual paging os iS3000
you search the network manual, fnxx810e.pdf.
I'll try to send it to you.
For my interest, how you want to connect the loudspeakersystem?, which board/line?
Is there only one station for paging, or there are more speakerstations and you have to select which speaker is used?
I hope you can receive my attachement.
You have only some days to download the file.
Regards
Werner (wernergo)