Hi everyone, i have a Windows XP Professional SP2 running as a Windows Virtual Machine on a Windows 7 laptop.
I have installed RCC Version: CPL_CC_31.10.28c.22_10_31_2007
The laptop's Network card is bridged and the virtual machine has a separate IP address.
My Call Pilot 150 version is 31.10.14.22.
When running the connection test i can see that ports 8088 and base port 2222 are passing, however, port 2223 isn't. I believe the issue can be with missmatch of software versions between Call Pilot and RCC or possibly this port 2223 is blocked on CP150 31.10.14.22 version.
would there be anything else to look for? I hired a telcom company but they keep running me around by first saying that first i had to downgrade from SP3 to SP2 which i did and now they are telling me that i should not run this on a virtual machine. i am really stuck here and need to finish this project ASAP.
Thank you in advanced.
I have installed RCC Version: CPL_CC_31.10.28c.22_10_31_2007
The laptop's Network card is bridged and the virtual machine has a separate IP address.
My Call Pilot 150 version is 31.10.14.22.
When running the connection test i can see that ports 8088 and base port 2222 are passing, however, port 2223 isn't. I believe the issue can be with missmatch of software versions between Call Pilot and RCC or possibly this port 2223 is blocked on CP150 31.10.14.22 version.
would there be anything else to look for? I hired a telcom company but they keep running me around by first saying that first i had to downgrade from SP3 to SP2 which i did and now they are telling me that i should not run this on a virtual machine. i am really stuck here and need to finish this project ASAP.
Thank you in advanced.
