×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Extreme 450e and HP Proliant Core Switch

Extreme 450e and HP Proliant Core Switch

Extreme 450e and HP Proliant Core Switch

(OP)
Inherited a seemingly basic setup - HP Proliant Switch - Sonicwall Firewall plugged into port 24 on the HP
only default vlan1 with Ip - 199.95.137.13
Firewall setup with correct routes to HP switch
This all worked fine , anyone on the 199. network could access anyone and get out to the web.


I added in an Extreme 450e poe switch to support new wireless network.
I followed a setup that i was advised on to get it working and after many frustrating days finally got it working.
by adding new vlan2 wireless to hp switch giving it an ip address of 192.168.3.11 and tagging port 21 which linked it to the new extreme switch.
adding a static route to the firewall 0.0.0.0 0.0.0.0 199.95.137.1

On the extreme switch all i did was create a new vlan with ID 2 , named it wireless, tagged port 21 {uplink to HP}
and added ports 1-16 untagged
I did not enable ipforwarding or assign either vlan an ipaddress.

Added below route setup to firewall as per sonicwall support -



Plugged laptop into port 1, assigned it a static 192.168.3.x address with gateway of 192.168.3.11
and was finally able to ping outside the firewall.
since then everything has been working fine. :)



After rebooting HP switch this week we are now unable to get out to the web again. :(
The extreme switch was not powered off when i rebooted the main switch.
Tried rebooting Extreme several times still nothing

Reset Extreme to factory settings and setup vlan 2 again

Deleted vlan 2 from HP switch and then readded it.

Still cannot get out - see pingable addresses below

Rebooted both the Firewall and the HP switch this weekend.


Here is the current setup -
Sonicwall Firewall - 199.95.137.1
HP ProLiant "CORE" SWITCH - 199.95.137.13 (vlan1) 192.168.3.11(vlan2)
EXTREME SWITCH - vlan1, vlan 2 (no ipaddresses)
Laptop plugged into Extreme (ip 192.168.3.249)

Here is the config

Firewall Sonicwall NSA3500 -- 199.95.137.1 - connected to port 24 on HP switch

Address Object -
Name - HPSWITCH
Zone Assignment- LAN
Type- Host
IP - 199.95.137.13

Name - VLAN WIRELESS
Zone Assignments - LAN
TYPE- NETWORK
NETWORK - 192.168.3.0
NETMASK - 255.255.255.0

Route Policies -
Source - ANY
Destination VLAN WIRELESS
SERVICE - ANY
GATEWAY - HP SWITCH
INTERFACE - X0

Port 24 to firewall

------------------------------------

HP Procurve 2910al switch

Gateway default 199.95.138.1
Ip forwarding
Ip route 0.0.0.0 - 0.0.0.0 - 199.95.138.1

Vlan 1 -- default --- HP switch ip 199.95.137.13
Tagged port 21

Vlan2 -- wireless
192.168.3.11
Tagged port 21


IP Route Entries

Destination Gateway VLAN Type Sub-Type Metric Dist.
------------------ --------------- ---- --------- ---------- ---------- -----
127.0.0.0/8 reject static 0 0
127.0.0.1/32 lo0 connected 1 0
156.153.78.192/27 connected 1 0
192.168.3.0/24 wireless 2 connected 1 0
199.95.137.0/24 DEFAULT_VLAN 1 connected 1 0



HP PORT 21 connected via ethernet to PORT 21 Extreme

--------------------------------------------

Extreme 450e Switch

Vlan1 default
Tagged port 21

Vlan2 wireless
Tagged port 21
Untagged port 1-16

ipforwarding disabled
No iproutes added

---------------------------------------------
Dell Laptop Plugged into port1 on the extreme

Laptop assigned ip 192.168.3.249
255.255.255.0
192.168.3.11

---------------------------------------------

Ping Results

From Laptop

Can ping 192.168.3.11
Can ping 199.95.137.13
Can ping 199.95.137.1

Cannot ping past firewall autodesk ip /yahoo ip

From firewall

Can ping 192.168.3.11
Can ping 199.95.137.13
Can Ping Web Addresses

Cannot ping Laptop


From Extreme



From HP SWITCH

Can Ping 199.95.137.X (entire Network)
Can Ping 199.95.137.1 (firewall)
Can Ping 192.168.3.11
Can Ping 192.168.3.249 (laptop)



any help appreciated to help me get out on this extreme :)

I thought that i might need to add an IPaddress to vlan2 on the extreme so i gave it an ip address of 192.168.3.3
I also tried adding a default route on the extreme of 192.168.3.11
but nothing changed.


Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close