emtsupport
Vendor
Check this out
PRI Integration
MWI (Message Waiting indication) Integration
PRI Integration
MWI (Message Waiting indication) Integration
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
E-MetroTel UCx integration with Nortel/Avaya CS1000
- Thread starter emtsupport
- Start date
- Status
- Thread starter
- #3
emtsupport
Vendor
Please contact our office at 214-556-5917 is you need assistance in configuring this interface with your UCx.
This does require an E-MetroTel software module to be installed on the UCx.
The configuration on the M1 just uses a serial port. The pri config is completely default NI2.
Quite elegant actually!
This does require an E-MetroTel software module to be installed on the UCx.
The configuration on the M1 just uses a serial port. The pri config is completely default NI2.
Quite elegant actually!
- Status