-
1
- #1
emtsupport
Vendor
We have developed a GUI page to set the amplitude levels on the digital gateway for the Phone ports. We also have controls to enable and disable the Echo Canceler (ECAN) and the Automatic Gain Control (AGC). Just do a software update on both the UCx server and the Digital Gateway to pick up these features. It is located on the Gateway tab.
For Digital phones you can set the volume levels for the handset, the headset, and the speaker. Relocation, AGC and ECan are enabled by default.
For Analog ports the AGC and ECAN are disabled by default so that they can be used for Fax Machines or Modems.
You can also set the DTMF volume. This is a System setting and affects all ports.
For Digital phones you can set the volume levels for the handset, the headset, and the speaker. Relocation, AGC and ECan are enabled by default.
For Analog ports the AGC and ECAN are disabled by default so that they can be used for Fax Machines or Modems.
You can also set the DTMF volume. This is a System setting and affects all ports.