Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

have error

Status
Not open for further replies.

mygoal

Technical User
Joined
Apr 21, 2013
Messages
1
Location
EG
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sort is
port(reset,clk:in std_logic;
sort_array :in std_logic_vector(3 downto 0);
data_out:out std_logic_vector(3 downto 0));

architecture sort_a of sort is
type sort_array is array (0 to 4)of std_logic_vector(3 downto 0);
constant sample : sort_array :=(0000,0010,0100,0110,1000);
variable i : integer range 0 to 4 ;
process(clk)
begin
if rising_edge(clk)then
if reset="1";
data_out<=sample(i);
else
data_out<=(0000,1000,0010,0100,0110);
end if ;
end if;
end process;
end sort_a;


this is the error of this code , i want solution
near "process": expecting END
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top