SMI Workbench Error
SMI Workbench Error
(OP)
Hi all,
I have installed SMI Workbench on a set of PC's that it was never installed on before.
When I try to access the "fat client" I received an error advising "Internal Application Error. Please Contact your system administrator" - the trouble is that I am the system administrator and not sure where to go with it.
Any help would be greatly appreciated.
Thanks
I have installed SMI Workbench on a set of PC's that it was never installed on before.
When I try to access the "fat client" I received an error advising "Internal Application Error. Please Contact your system administrator" - the trouble is that I am the system administrator and not sure where to go with it.
Any help would be greatly appreciated.
Thanks
RE: SMI Workbench Error
Doubt it will work with Windows 7 or 8 (probably .net version related).
RE: SMI Workbench Error
Thanks for the response. Yes it's running on Windows XP.
RE: SMI Workbench Error
After a search on 'Internal Application Error' some tips came up;
Use the latest SU and PEP's and the standard install path (with sufficient write rights) and try installing on a 'clean PC';
http://www.tek-tips.com/viewthread.cfm?qid=1340682
Hope this helps...