×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

what does err-026 mean?

what does err-026 mean?

what does err-026 mean?

(OP)
I am trying to reload the operating system on a Fujitsu 9600 HDD and it keeps kicking back err-026! What does this mean and how do I correct this issue? Ant help at all would make my day!!

RE: what does err-026 mean?

ERR-026 Floppy disk error; read / write error occurred Replace floppy

If you are have a running system and the HDD is "unloaded", you might be able to "RES HD,FM00" instead of "LOA FILE"

Some of the error codes are in the Commands Manual Vol 1, page 11
General categories of errors are listed below:
• ERR-000 to 039: See below.
• ERR-040 to 049: Undefined, uninstalled, unassigned data.
• ERR-050 to 059: Unavailable or out of range data.
• ERR-060 to 069: Assigned twice.
• ERR-070 to 079: Invalid range specification.
• ERR-080 to 089: Typed twice.
• ERR-090 to 099: Busy status.
• ERR-100 to 127: Data unmatched or miscellaneous

ERR-001 Function error; verb-noun not defined Enter correct verb / noun
ERR-002 Command not executable;command cannot be processed concurrently with another command Reenter this command after other command terminates
ERR-003 Data access error; data currently in use by another command Reenter this command after other command terminates
ERR-004 Input parameter error; no required parameter
• Undefined parameter
• Value out of range
• Invalid parameter input format, etc.

ERR-005 Input time-out; time-out for a response occurred
ERR-006 Character input exceeds parameter; more than 128 characters input Check the parameter
ERR-007 Stop command invalid; stop function not available
ERR-008 Processor failed Recover the system and reenter the command
ERR-009 Command program does not exist in the file Check the file
ERR-010 Service associated with command not available Check available service
ERR-011 System operation mode is changing to parallel Reenter when the system has completed the change
ERR-020 I/O device failed Repair fault and reenter this command
ERR-021 I/O device not installed Specify an installed I/O device
ERR-022 Invalid I/O device; system file specified Specify a non-system file
ERR-023 I/O device in use by another command or on-line program Reenter command after I/O device is released
ERR-024 File name not found Check the file name
ERR-025 File memory lacks space to create new file Check remaining space in file memory
ERR-026 Floppy disk error; read / write error occurred Replace floppy disk
ERR-027 File size too small; output data overflowed specified file Create a new, larger file
ERR-028 Invalid file name; invalid system file specified Enter a valid file name
ERR-029 I/O error condition; unusual access requested Reeneter the command after checking the access condition
ERR-030 File label unreadable Request a file with a valid file label
ERR-031 I/O device is out of service Reenter this command after I/O service is restored
ERR-032 Primary power lost Reenter the command after primary power is restored
ERR-033 LOGIN session not initiated Enter LOGIN command
ERR-034 Invalid security level Specify an installed I/O device
ERR-037 I/O device not installed; the backedup filer has not been loaded to the hard disk Reenter the command after the backed-up file is loaded

RE: what does err-026 mean?

(OP)
Thank you for the reply! I think that my system is toast; I cannot get it to recognize the floppy drive or the HDD at all! When I run the dis syss it returns the FM00 unloaded notice and when I try to run the loa file it will not run the floppy, even when the floppy drive was replaced there is still no action on it! Tried another HDD too but with no luck at all! I have never heard of or tried the RES HD, FM00 command, only the RES IO,FMOO. Since I do not have my HDD at the moment I cannot try it but I will here around 8:00 am eastern time.
The whole thing started with what appeared to be a failure of the HDD, I couldn't run any commands at all nor could I view anything aside from the DIS SYSS COMMAND, I couldn't for instance display a particular extension or the forwarding of a particular extension etc. I could only log onto the system and view very basic system current status. Any idea as to what else to try with this? BTW it is a 9600VS. Thanks again for the reply and info, anything else you can recommend would be super appreciated!!

RE: what does err-026 mean?

Losing the HDD on the VS is not a good thing. It will be hard to find a replacement at 40MB. The system will continue to function until the next power failure, but you won't be able to administer any changes, as you only have the data the is loaded into memory to work with. The RES HD command does not work on the VS, it's a US/ES command that was introduced about Rls 13. To see if your FM01 (floppy) even works you can try to read a disk using DIS FL,FM01. You might also try to clean the FDD with a 3.5 cleaning disk and the command CLN FDD

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close