×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Can a BIOUOA card be used to replace a PSIOUB card?

Can a BIOUOA card be used to replace a PSIOUB card?

Can a BIOUOA card be used to replace a PSIOUB card?

(OP)
We have a Fujitsu F9600 E PBX, running on Release 10 software. It is a redundant PBX. The PSIOUB circuit board that allows us to communicate with the PBX has gone bad. We have no EMML, or MML communication with the PBX. We can move the redundant PISOUB card down to replace the bad card, and set up the dip-switches (strapping) to assign the DCC ports for communication. However, that leaves us with no redundancy, and no PMSI features.

We have a F9600 U PBX that has been replaced with a VoIP system from another of our sites. It contains a BIOUOA card that performs the same functions as the bad PSIOUB card. Teh BIOUOA card is not shown in the Release 10, or even the Release 11 circuit card guide. Both cards have an on-board hard drive, floppy drive, and two available DCC ports. My question is, can the BIOUOA card be used to replace the failed PSIOUB card? And can the hard drive from the PSIOUA card be swapped into the BIOUO card? Are they compatible, and swappable?

Thank you for your responses.

Sincerely; bflowers

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close