I am trying to enable RADIUS in management security. I have entered the settings for a RADIUS server with the server IP address, port number, and key. On my server I have added the device as a RADIUS client and enable a policy to allow user groups to login to the switches. I am using the same policy to access a PC6224 switch on the same network via RADIUS. When logging into the 2808 with a network password I recieve an invalid username and password error. The event viewer on my server does not indicate a request has been made for authentication from the device. The issue persist with telnet and web interface. I have the most current firmware. I believe the login request is being handled locally and not moving onto the external server. I am not currently using VLANs.

Am I missing a setting to enable RADIUS login from http?

Radius Settings

IP Address                                192.168.10.4
Priority (0-65535)                        0
Authentication Port (0-655355)            1812
Number of Retries (1-10)                  Default
Timeout for Reply (1-30)                  Default
Dead Time (0-2000)                        Default
Key String (0-128 Characters)             **********
Source IP Address                         Default

Default Parameters

Default Retries (1-10)                    3
Default Timeout for Reply (1-30)          3
Default Dead Time (0-2000)                0
Default Key String (0-128 Characters)
Source IP Address                         0.0.0.0

Thank you