×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

LAB 3640 Access Router Config.

LAB 3640 Access Router Config.

LAB 3640 Access Router Config.

(OP)
I think I may have posted this in the wrong thread before.  I think I am in the right place now..

I am trying to set up a Lab (CCNA) using the following equipment.

1. 3640 as an Access/Terminal Server  ( I will connect to this via console, I won't access via network)

2. Two 2600 series Router

3. One 2800 series Router

4. Another 3600 router

5. 3 Catalyst switches 12 Port, two 48 Ports.

The first thing I want to do is configure the 3640 Access server, what configuration can I use for this router.  I have just been able to find configurations using the 2500 series routers as a jump servers.

I have an 8 lead Octal cable  with HD68 to (8) RJ45 connector ends. This will connect from the 3640 to the other devices console ports (cable will connect from ASYNC module interface 0-7 on the 3640).

I have WIC 1T & 2T cards and correct cables for all the other routers to connect to each other. I want to first get the terminal server going.  Any help with the correct configs would be appreciated or a link to configs for the 3640 access router.  

RE: LAB 3640 Access Router Config.

The configuration should be similar to a 2500 series
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml

The 3600 series have special line numbers depending on the slot that you use:
http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00801ca70b.shtml

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

RE: LAB 3640 Access Router Config.

(OP)
Thanks a lot for the info. Unclerico, I will try it and see how it works out.

RE: LAB 3640 Access Router Config.

(OP)
Thank you very much for your help unclerico, those links were helpful.  I was able to successfully configure the 3640 as an access router.  I quickly learned having the async module in slot 3 wasn't the best option and moved it to slot 0 which gave me the line numbers I required.  I was also able to connect the other 4 routers via serial to each other and have been practicing a few basic labs. Once again thanx..
 

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close