Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Deleting inventory items
- Thread starter drh9915
- Start date
I dunno why it would thing that you are doing an inventory, but going to Inventory Management --> Physical Count --> Physical count work sheet, set the form to clear frozen items, and then proceed should do the trick.
ChaZ
There Are 10 Types Of People In The world:
Those That Understand BINARY And Those That Don’t.
ChaZ
There Are 10 Types Of People In The world:
Those That Understand BINARY And Those That Don’t.
- Thread starter
- #3
LouieGrandie
Technical User
If this is the case then you probably have some stuck records. You will need to go into the Library Master Utilities and Re-Init the IME - Physical Count Data Entry files to clear it out.
- Thread starter
- #5
Thank you for your response. That sounds like my problem however I don't have the option to re-int the IME physical count data entry files under the Library Master Utilities. Should I be looking another place or could it be called something else?
Again, thank you for your help.
Again, thank you for your help.
What version are you on? If you are on 4.40 then you don't have an IME file.
Dawn
Visit Sage's Online Community
Dawn
Visit Sage's Online Community
- Thread starter
- #7
LouieGrandie
Technical User
Go to File, Run and type in *INFO that will return your version number.
- Thread starter
- #9
If it is version 4.10 you could also go to HELP --> About and find your version there too.
If you are on 4.10 then you do have an IME file.
If you are on version 4.10 then it couldn't possibly have been installed in 2001 or 2002 as that version didn't come out until November 2005.
Dawn
Visit Sage's Online Community
If you are on 4.10 then you do have an IME file.
If you are on version 4.10 then it couldn't possibly have been installed in 2001 or 2002 as that version didn't come out until November 2005.
Dawn
Visit Sage's Online Community
- Thread starter
- #11
LouieGrandie
Technical User
If *INFO returned v4.10 then that is correct. v5.1.2600 is not a current release level as the current is only v4.50.
In v4.10 you do have an IME file. Re-init that file and then rebuilt the sort files and you should be o.k.
In v4.10 you do have an IME file. Re-init that file and then rebuilt the sort files and you should be o.k.
- Status
Similar threads
- Locked
- Question