Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


Breaking Extreme Summit X450e-48P stack

Breaking Extreme Summit X450e-48P stack

Breaking Extreme Summit X450e-48P stack

I have a X450e-48P switch with a bad fan that needs replaced however it is part of a stack. I want to make sure that I am approaching this replacement correctly. Here are the items that I think need done but would like input if this is incorrect.

#1 Backup config of current (faulty) switch
#2 Disable Stack
#3 Replace old hardware with new hardware
#4 Enable Stack
#5 Restore config from original switch

Is there anything I am missing? I haven't dealt with a stack configuration before so not quite sure if this is how I should handle.


RE: Breaking Extreme Summit X450e-48P stack

Since the config is held by the master switch in the stack, you din't need to back it up, although it won't hurt.  What you need to do is:

1)Unconfigure the node you are replacing:
unconfigure stacking slot x

2) remove the node you are replacing

3)Add the new switch to the stack:
configure stack node-address <mac address of new node> slot-number x
synchronize stacking node-address <mac address of new node>
Answer yes when prompted "Are you sure you want to synchronize"
Reboot the node you just added.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close