×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

VPN Through Contivity 1100 Branch Tunnel Static Address Problem

VPN Through Contivity 1100 Branch Tunnel Static Address Problem

VPN Through Contivity 1100 Branch Tunnel Static Address Problem

(OP)
I have a two Contivity 1100 with a branch tunnel established between them.  After a reboot on one of the Contivitys I can no longer connect to computers with static set addresses.  The Contivitys are set up as DHCP servers for each location.  A tracert from one location to the other (DHCP assigned remote ip) is as follows:

c:\>tracert 192.168.254.5

Tracing route to 192.168.254.5 over a maximum of 30 hops

 1  395 ms  408 ms  360 ms  192.168.0.2
 2  870 ms  691 ms  998 ms  192.168.254.253
 3  816 ms 929 ms  914 ms  192.168.254.5

Trace complete.

c:\>

However, when I attempt it with a statically assigned ip I get:

c:>tracert 192.168.254.201

Tracing route to 192.168.254.201 over a maximum of 30 hops

 1  411 ms  419 ms  422 ms  192.168.0.2
 2  918 ms  935 ms 1008 ms  192.168.254.253
 3    *       *       *     Request timed out.
~
30    *       *       *     Request timed out.   

Trace Complete.

c:\>

Nothing has changed on the computers on each subnet.  The computers on each subnet can access any other computer (or Contivity) on their own subnet.  They can also access the dynamically assigned address on the remote subnet, just not the statically assigned.  I believe the problem to be some setting in the Contivity 1100 that has reverted to a factory reset after the reboot, bit I cannot find it.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close