I just installed a new Sony Pressa CD-RW Model CRX 1611 ( 16x,8x, 40x) on my PC ( Win 98 SE, Celeron 900, 512 MB RAM) . I planned to use the program < Roxia Direct CD v5.02b > to write files to CD-RW discs . The problem was that DirectCD did not see the CD-RW drive : it indicated that there was no supported drive when I started the program .
I checked the set-up and every thing appeared OK because the CRX 1611 can read CD-R and CD-RW discs.
I then started another program called "MyCD Pro v2.0" to check if I can burn a CD . When I started this program, I got a message indicating that : " No compatible Recorder drives have been found in the computer" .
My questions are :
1) What's going on here ? Is Something wrong with the Burner ?
2) Why I can still read CDs and the software does not recognize the burner ?
2) Please advise what should I do next to get things going ?
Thank you,
I checked the set-up and every thing appeared OK because the CRX 1611 can read CD-R and CD-RW discs.
I then started another program called "MyCD Pro v2.0" to check if I can burn a CD . When I started this program, I got a message indicating that : " No compatible Recorder drives have been found in the computer" .
My questions are :
1) What's going on here ? Is Something wrong with the Burner ?
2) Why I can still read CDs and the software does not recognize the burner ?
2) Please advise what should I do next to get things going ?
Thank you,